Zusammenfassung
Eine neue, große Plattenaufteilanlage wird mit Blick auf Arbeitsablauf und Maschinentechnik beschrieben. Neben umfangreicher Fördertechnik besteht sie aus Kopfstückstation, Längsschnittsäge mit fahrendem Tisch unter dem ruhenden Sägeportal und einer Querschnittsäge von unten schneidend mit zwei Positionierschiebern. Die maximale Schnitthöhe beträgt 160 mm.
Abstract
A large new board trimming plant is described considering its processing and machinery. Besides large-scale transportation techniques, the whole plant consists of the following: processing station for the head stripes; circular saws for longitudinal cuts mounted on a socalled saw-portal, the table bearing the piled boards travelling below the saw-portal, a cross-cut saw, sawing from underneath and two positioning bars. The maximum cutting height is 160 mm.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Soiné, H. Neue Plattenaufteilanlage bei Pfleiderer, Rheda. Holz als Roh-und Werkstoff 47, 17–20 (1989). https://doi.org/10.1007/BF02612344
Issue Date:
DOI: https://doi.org/10.1007/BF02612344