Zusammenfassung
Auch aus flächig verleimten Holzwerkstoffen, die mit Aminoplasten gebunden sind, können Formaldehyd-Emissionen auftreten. Es wird gezeigt, von welchen Faktoren die bei der Herstellung der Plattenwerkstoffe freiwerdende Formaldehydmenge beeinflußt wird. Der nachträglich aus den Werkstoffen emittierte Formaldehyd wird nicht nur vom Trägermaterial bestimmt, sondern auch durch die Arbeits-und Preßbedingungen beim Beschichten und Furnieren. Besonders wichtig erscheint auch der Formaldehydgehalt des verwendeten Furnierleims.
Abstract
Aminoplast-bonded plywood, coreboard, and venecred or faced particle board may also release formaldehyde. This report deals with the factors that have an influence on the quantity of formaldehyde released during the production of boards. The quantity of formaldehyde subsequently released by the panels is determined not only by the carrier material, but also by the working and pressing conditions in laminating and veneering. The formaldehyde content of the glue for veneering apparently also plays an important role.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wittmann, O. Formaldehydarme Flächenverleimung mit Aminoplastharzen. Holz als Roh-und Werkstoff 43, 187–191 (1985). https://doi.org/10.1007/BF02612123
Issue Date:
DOI: https://doi.org/10.1007/BF02612123