Skip to main content
Log in

Spezifische Färbungen zum Nachweis der Kaurit- und Tegofilm-Verleimung in Sperrholz

Specific staining for the detection of gluing with urea and phenol-formaldehyde resins in plywood

  • Published:
Holz als Roh- und Werkstoff Aims and scope Submit manuscript

Zusammenfassung

Die in der Literatur beschriebenen Methoden zum mikrochemischen Nachweis von Kaurit- und Phenolharzverleimungen werden erörtert und durch eigene Vorschläge ergänzt. Für die Kaurit-Verleimung eignet sich eine Kontrastierung des Holzes mittels Methylenblauund des sekundär verwendeten Einbettungsmittels mit Sudan III. Der Nachweis von Phenolharz gelingt sehr schön mit Javelle-Wasser und mit Methylenblau. Beide Reagenzien sprechen auf Phenole an, indem sie diese entweder oxydieren oder im Kationenaustausch markieren. Mit ihrer Hilfe können verschiedene Kondensationsstadien erkannt werden, was wesentlich zum Verständnis des Eindringungsmechanismus von Phenolharzen in das Holz und die verholzten Zellwände beiträgt.

Summary

Different methods for the microchemical staining of urea and phenol-formaldehyde resins in wood are discussed and two new staining reactions with Eaude Javelle and methylenblue described. The staining of methacrylate-embedded sections of urea-glued plywood or chipboard is possible by contrasting the wood substances by methylenblue and the methacrylateresins by Sudan III. Eau de Javelle and methylenblue are most valuable for the detection of phenol-formaldehydes in wood, as the first one oxydizes the phenols and the second one stains them by cation-exchange. It is, furthermore, possible to determine the quality of condensation as resols and resitols are ready for staining, whereas resits are not. It is, therefore, possible to study the mechanism of the impregnation of cell walls with phenol-formaldehyde resins applying these two staining-reactions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Schrifttum

  1. Bosshard, H. H.: Die Mikrostruktur von Novopan-Spanplatten. Holz als Roh- u. Werkstoff Bd.16 (1958) H. 9, S. 330/335.

    Google Scholar 

  2. Bosshard, H. H.: Fluoreszenzmikroskopische Untersuchungen in Spanplatten. Z. Schweiz. Forstverein (Beiheft) Bd.30 (1960) S. 13–20.

    Google Scholar 

  3. Frey-Wyssling, A.: Die pflanzliche Zellwand. Berlin/Göttingen/Heidelberg 1959: Springer.

    Google Scholar 

  4. Futo, L. P.: Zur Mikrotechnologie der Beschichtung und Verleimung von Sperrholz mit Phenolharzen. Diss. ETH 1963 (im Druck).

  5. Kitazawa, G.: A Study of Adhesion in the Glue Lines of 22 Woods of the United States. Syracuse University Publ. 66. Syracuse 1946: The New York State College of Forestry.

    Google Scholar 

  6. Marian, J. E.: Träoch plast: Aktuella problem för limmnings—och utbehandlingsforskning. Meddelande 48 B. Stockholm 1953: Svenska Träforskningsinstitut.

    Google Scholar 

  7. Marian, J. E., u. D. A. Stumbo: Adhesion in Wood. Holzforschung Bd.16 (1962) H. 5, S. 134–148.

    Article  CAS  Google Scholar 

  8. Newmann, J. B., E. Borysko u. M. Swerdlow: New Sectioning Techniques for Light and Electron Microscopy. Science Bd/110 (1949) S. 66/68.

    Article  Google Scholar 

  9. Plath, E.: Die Härtung von Duroplasten bei der Herstellung von Holzwerkstoffen. Holz als Roh- u. Werkstoff Bd.16 (1958) H. 12, S. 467–471.

    Google Scholar 

  10. Plath, E. u. L.: Färbemethoden für Mikrotomschnitte aus verleimten und oberflächenbehandelten Holzwerkstoffen. Holz als Roh- u. Werkstoff Bd.17 (1959) H. 6, S. 245–249.

    Google Scholar 

  11. Rendle, B. J., u. G. L. Franklin: The Identification of Plywood Glues. Mimeographed publication. Princes Risborough 1942: F. P. R. L.

    Google Scholar 

  12. Stamm, A. J., u. R. M. Seborg: Resin-Treated, Laminated, Compressed Wood. Trans. of Am. Inst. of Chem. Eng. Bd.37 (1941) S. 385–398.

    CAS  Google Scholar 

  13. Suchsland, O.: Über das Eindringen des Leimes bei der Holzverleimung und die Bedeutung der Eindringtiefe für die Fugenfestigkeit. Holz als Roh- u. Werkstoff Bd.16 (1958) H. 3, S. 101–108.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

Die Untersuchungen sind durch Beiträge aus den Arbeitsbeschaffungskrediten des Bundes zur Förderung der wissenschaftlichen Forschung finanziert worden. Wir möchten den zuständigen Behörden auch hier unseren besten Dank aussprechen.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Bosshard, H.H., Futo, L.P. Spezifische Färbungen zum Nachweis der Kaurit- und Tegofilm-Verleimung in Sperrholz. Holz als Roh-und Werkstoff 21, 225–228 (1963). https://doi.org/10.1007/BF02609727

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02609727

Navigation