Zusammenfassung
Die für die Fertigungs- und Materialkosten entscheidenden Abschnitte der Spanplattenerzeugung liegen in dem Bereich Trockner bis einschließlich Presse mit Kühlung. Hier gilt es, optimal zu steuern. Es wird ein einfaches Optimierungsmodell für diesen Bereich vorgeschlagen, und ein Weg gezeigt, wie man sich die für eine Beurteilung des Verfahrens nötigen Unterlagen im eigenen Betrieb kostengünstig beschaffen kann.
Abstract
Manufacturing costs for particleboards can be controlled to a large extent by applying optimal control to process operations in the drying, gluing, mat-forming and pressing sections. A simple optimization model is developed. Suggestions are made how to collect the necessary data for the estimation of parameters at little extra cost.
Literatur
Goldberger, A.S.; Nagar, A.L.; Odeh, H.S. 1961: The covariance matrices of reduced form coefficients and of forecasts for a structural econometric model. Econometrica 29:556–572
Lobenhoffer, H. 1982: Auswertung von Prozeßdaten mittels statistischer Methoden. Holz Roh-Werkstoff 40:395–401
Vienup, W.; Gür, B. 1981: Schnellprüfungen in der Spanplattenindustrie. Abschlußarbeit an der Fachschule für Technik, Detmold
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lobenhoffer, H. Optimale Steuerung von Spanplattenformsträngen. Holz als Roh-und Werkstoff 42, 385–387 (1984). https://doi.org/10.1007/BF02608489
Issue Date:
DOI: https://doi.org/10.1007/BF02608489