Abstract
This paper is to study influences of four main factors of the mechanical oriented forming installation with moving saws back and forth, i.e. the distance between two neighbouring saws (D), the moving frequency of the saw (F), the moving length of saws (L) and the height of strands to fall down (H), on orientation effectiveness of strands. The average orientation effectiveness of these strands. The results show that both factorD and factorH have important influence on the orientation of strands, factorL only has fail-sized influence, however, factorF nearly exerts no influence.
Zusammenfassung
Vier wesentliche Faktoren der mechanischen Orientierungsmaschine sind in diesem Experiment untersucht worden, um ihre Einflüsse auf die Orientierung der Späne zu ermitteln. Die vier Faktoren sind: Der Abstand zwischen den benachbarten Sägen (D), die Bewegungsfrequenz der Sägen (F), die Länge des Sägeweges (L) und die fallende Höhe der Späne (H) wurden als Maß der Späneorientierung gemessen. Die Untersuchungsergebnisse zeigen, daß vor allem die FaktorenD undH die Orientierung der Späne beeinflussen Der FaktorL hat nur eine geringe Wirkung; der FaktorF ist fast ohne Einfluß auf den Orientierungsgrad.
Similar content being viewed by others
Literature
Deppe, H.-J. 1979: Zum Stand der Erzeugung von Plattenwerkstoffen mit Spanorientierung (OSB-Technologie). Holz-Zbl. 105: 1235–1237
Deppe, H.-J.; Ernst, K. 1982: Taschenbuch der Spanplattentechnik. Stuttgart: DAW Verlag
Hutchinson, J. G. 1981: Fast-growing young poplars make good panels. Forest Ind. (U.S.) 10:58–59
Suchsland, O. 1985: On the measurement of fiber orientation in Fiberboard. For. Prod. J. 33(10): 39–42
Willion, T. S. 1977: Model for tensile strength of oriented flakeboard. Wood Sci. 10(2): 68–71
Zhou, D. 1985: Mechanical aligning of strands in strandboards manufactoring. J. Nanjing For. Univ. 2: 89–95
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zhou, D. A study of oriented structural board made from hybrid poplar. Holz als Roh-und Werkstoff 47, 405–407 (1989). https://doi.org/10.1007/BF02607991
Issue Date:
DOI: https://doi.org/10.1007/BF02607991