Abstract
The article contains results of a numerical investigation of the presure-flow characteristic of high-viscosity flows for different rates of heat transfer with the environment. The effect of nonmonotonicity of the characteristic ΔP(Vo) on the stability of operation of the die head of extrusion apparatus is discussed.
Similar content being viewed by others
References
Z. Tadmor and K. Gogos, Theoretical Fundamentals of Polymer Processing [Russian translation], Moscov (1984)
V. I. Pervadchuk, I. O. Glot, V. I. Yankov, and L. B. Mal’kov, Khim. Volokna, No. 3, 36–37 (1985).
S. A. Bostandzhiyan, A. G. Merzhanov, and S. I. Khudyaev, Dokl. Akad. Nauk SSSR, No. 1, 133 (1965).
S. L. Benderskaya, B. M. Khusid, and Z. P. Shul’man, Izv. Akad. Nauk SSSR, Mekh. Zhidk. Gaza., No. 3, 8–10 (1980).
V. I. Naidenov, A. M. Brener, V. V. Dil’man, and A. A. Maksimov, in: Current Heat and Mass Transfer Problem: in Chemical Engineering [in Russian], Materials of the International Workshop, Pt. 3, Minsk (1987), p. 116–123.
V. I. Naidenov, Teplofiz. Vysok. Temp.24, No. 1, 82–88 (1986).
V. I. Naidenov, A. M. Brener, and V. V. Dil’man, Teor. Osnovy Khim. Tekhnol.,23, No. 3, 300–308 (1929).
A. G. Merzhanov and A. M. Stolin, Prikl. Mat., Tekhn. Fiz., No. 1, 65074 (1974).
A. Ya. Malkin and A. E. Chalykh, Diffusion and Viscosity of Polymers. Measuring Methods [in Russian] Moscow (1979).
N. B. Aleksapol’skii and V. I. Naidenov, Teplofiz. Vysok. Temp.,17, No. 4, 783–791 (1979).
Y. T. Shan and J. R. A. Pearson, Chem. Eng. Sci.,29, No. 6, 1485–1493 (1974).
J. L. Duba, E. E. Klaus, and S. C. Lin, Ind. Eng. Chem. Res.,27, No. 2, 352–361 (1988).
V. G. Ponomarenko, G. F. Potebnya, L. M. Ul’ev, et al., Inzh.-Fiz. Zh.59, No. 1 (1990), Deposited at VINITI, Reg. No. 1224-B90, March 5, 1990.
H. Ockendon, J. Fluid Mech.,93, Pt. 4, 737-746 (1979).
L. M. Ul’ev, Teor. Osnovy Khim. Tekhnol.,26, No. 2, 243–253 (1992).
V. G. Ponomarenko, G. F. Potebnya, and L. M. Ul’ev, Prom. Teplotekhn.7, No. 1, 9–16 (1985).
Additional information
Ukrainian Research and Design Institute of Chemical Machine Building. Khar’kov, Ukraine, Tranated from Inzhenerno-Fizicheskii Zhurnal, Vol. 69, No. 4, pp. 606–614, July–August, 1996.
Rights and permissions
About this article
Cite this article
Ul’ev, L.M. The pressure-flow characteristic of circular molding channels with a nonisothermal flow of thermoplastic polymers. J Eng Phys Thermophys 69, 473–480 (1996). https://doi.org/10.1007/BF02607929
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02607929