Abstract
This paper gives a review of fixture-design research, most of it done in the 1980s. The major topics of the review are the fixturing principles (supporting, locating and clamping), automated fixture design (configuration, assembly and verification), and fixture hardware design (dedicated, modular and electric/magnetic types).
Similar content being viewed by others
References
T.-C. Chang and R. A. Wysk,An Introduction to Automated Process Planning Systems, Prentice-Hall, Englewood Cliffs, NJ, 1985.
M. C. Wu, “A new methodology for automatic process planning and execution based on adaptive information modeling”, PhD thesis, Purdue University, 1988.
E. G. Hoffman,Jig and Fixture Design, 2nd edn, Delmar Publishers, Albany, NY, 1985.
J. C. Trappey and C. R. Liu, “Issues of automatic fixture design in computer integrated manufacturing systems”,Proceedings, Robotics and Automation, International Association of Science and Technology for Development International Conference, Santa Barbara, Calif., pp. 149–154, 1988.
ANSI Y14.5M,Dimensioning and Tolerancing: American National Standard Engineering Drawings and Related Documentation Practices, ASME, New York, 1982.
E. G. Hoffman,Fundamentals of Tool Design, Society of Manufacturing Engineers, Dearborn, Mich., 1984.
F. Ingrand and J.-C. Latombe, “Functional reasoning for automatic fixture design”,Proceedings, CAM-1 13th Annual Meeting and Technology Conference, Clearwater Beach, Fla., pp. 8.53–8.65, 13–15 November 1984.
A. Markus, Z. Markusz, J. Farkas and J. Filemen, “Fixture design using Prolog: an expert system”,Robotics and Computer-Integrated Manufacturing,1(2), pp. 167–172, 1984.
A. Markus, “Strategies for the automated generation of modular fixtures”,Proceedings, Symposium on Manufacturing Systems—Design, Integration, and Control, Manufacturing International Conference, Atlanta, Ga., pp. 97–103, 1988.
P. M. Ferreira, B. Kochar, C. R. Liu and V. Chandru, “AIFIX: an expert system approach to fixture design”.Proceedings, Symposium on Computer-Aided/Intelligent Process Planning, ASME Winter Annual Meeting, Miami Beach, Fla., pp. 73–82, 1985.
P. M. Ferreira and C. R. Liu, “Generation of workpiece orientations for machining using a rule based system”,Robotics and Computer-Integrated Manufacturing,4(3/4), pp. 545–555, 1987.
A. Bagchi and R. L. Lewis, “On fixturing issues for the factory of the future”,Proceedings, Computer in Engineering, ASME, Chicago, Illinois, pp. 197–202, 1986.
Y. C. Chou, V. Chandru and M. M. Barash, “A mathematical approach to automatic design of fixtures: analysis and synthesis”,Proceedings, ASME Winter Annual Meeting, Boston, Mass., pp. 11–27, 1987.
Y. C. Chou, “Automatic design of fixtures for machining process”, PhD thesis, Purdue University, 1988.
M. S. Ohwovoriol and R. Roth, “An extension of screw theory”,Journal of Mechanical Design. 103(4), pp. 725–735 1981.
J. C. Trappey, “Methodology for automatic fixture design in a computer integrated environment”, PhD thesis, Purdue University, 1989.
J. C. Trappey and C. R. Liu, “Projective spatial occupancy enumeration for automatic fixture design”,Technical Report TR-ERC 89-15, Engineering Research Center for Intelligent Manufacturing Systems, Purdue University, 1989.
C. R. Liu and J. C. Trappey, “A structured design methodology and Meta Designer: a system shell concept for computer aided creative design”,Bound Volume of Proceedings, ASME Design Automation Conference, Montreal, Canada, pp. 309–313, September 1989.
T. Hoshi, “High-productivity machining research in Japan”,Journal of Applied Metal-Working,4(3), pp. 226–237, 1987.
M. Daimon, T. Yoshida, N. Kojima, H. yamamoto and T. Hoshi, “Study for designing fixtures considering dynamics of thin-walled plate- and box-like workpieces”,Annals of the CIRP,34(1), pp. 319–322, 1985.
A. Y. C. Nee, N. Bhattacharyya and A. N. Poo, “Applying AI in jigs and fixtures design”,Robotics and Computer-Integrated Manufacturing,3(2), pp. 195–200, 1987.
D. C. Berry, “Application of CAD/CAM to fixture design”,Proceedings, First Biennial International Machine Tool Technology Conference, Chicago, pp. 13–66, September 1982.
A. S. Miller and R. G. Hannam, “Computer aided design using a knowledge base approach and its application to the design of jigs and fixtures”,Proceedings of the Institution of Mechanical Engineers,199(B4), pp. 227–234, 1985.
P. M. Grippo, M. V. Gandhi and B. S. Thompson, “The computer-aided design of modular fixturing systems”,International Journal of Advanced Manufacturing Technology,2(2), pp. 75–88, 1987.
J. R. Boerma and H. J. J. Kals, “FIXES: a system for automatic selection of set-ups and design of fixtures”,Annals of the CIRP,37(1), pp. 443–446, 1988.
A. Hayashi, K. Yamazaki, T. Hoshi, K. Misawa and N. Suzuki, “Development of fixture design and fabrication system by means of CAD/CAM”,Proceedings, 16th North American manufacturing Research Conference, SME, University of Illinois, Urbana, Ill., pp. 429–436, 1988.
W. Jiang, Z. Wang and Y. Cai, “Computer-aided group fixture design”,Annals of the CIRP,37(1), pp. 145–148, 1988.
A. Fields, K. Youcef-Toumi and H. Asada, “Flexible fixturing and automatic drilling of sheet metal parts using a robot manipulator”,Proceedings, Japan-USA Symposium of Flexible Automation, Japan Association of Automatic Control Engineers, Osaka, Japan, pp. 571–578, 1986.
K. Youcef-Toumi, J. J. Bausch and S. J. Blacker, “Automated setup and reconfiguration for modular fixturing”,Proceedings, Symposium on Manufacturing Systems–Design, Integration, and Control, Manufacturing International Conference, Atlanta, Ga., pp. 121–128, 1988.
J. C. Trappey and C. R. Liu, “An automatic workholding verification system”,Proceedings, International Conference on Manufacturing and Technology of the Future (MSTF '89), Stockholm, Sweden, pp. 23–34, 6–9 June 1989.
H. Asada and A. B. By, “Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures”,IEEE Journal of Robotics and Automation, RA-1(2), pp. 86–94, 1985.
Y. Shoham, “Naive kinematics”,Proceedings, International Joint Conference on Artificial Intelligence, Los Angeles, CA., pp. 436–442, 18–23 August 1985.
M. Mani and W. R. D. Wilson, “Automated design of workholding fixtures using kinematic constraint synthesis”,Proceedings, 16th North American Manufacturing Research Conference, SME, University of Illinois, Urbana, Ill., pp. 437–444, 1988.
J. L. Colbert, “Workholding technology in flexible manufacturing and the design of a modular fixturing system”, MS thesis, Rensselaer Polytechnic Institute, Troy, NY, 1985.
E. G. Hoffman, “Modular systems and operation”,Manufacturing Engineering,92(1), pp. 37–38, January 1984.
Y.-C. Xu, G. Liu, Y. Tang, J. Zhang, R. Dong and M. Wu, “A modular fixturing system for flexible manufacturing”, inFlexible Manufacturing Systems, eds. H.-J. Warnecke and R. Steinhilper, IFS (Publications), Bedford, pp. 227–233, 1985.
Imao manufacturing Co. Ltd.,Venlic Block Jig System Catalog (BJ-7A), Japan, 1987.
A. Drake, “Fixture design: working with modules”,Manufacturing Engineering,92(1), pp. 35–38, January 1984.
C. J. Gouldson, “Principles and concepts of fixturing for NC machining centers”, inJigs and Fixtures, 2nd edn., ed. W. E. Boyes, SME, Dearborn, Mich., pp. 331–349, 1982.
K. Tuffentsammer, “Automatic loading of machining system and automatic clamping of workpieces”,Annals of the CIRP,30(2), pp. 553–558, 1981.
M. R. Cutkosky, E. Kurokawa and P. K. Wright, “Programmable conformable clamping”,Proceedings, AUTOFACT 4 Conference, Society of Manufacturing Engineers (SME), Philadelphia, pp. 11.51–11.58 30 November–2 December 1982.
V. A. Zdor, “Design of fixtures for use in automated manufacturing sections”,Soviet Engineering Research,3(7), pp. 58–61, 1983.
M. V. Gandhi and B. S. Thompson, “Phase-change fixturing for FMS”,Manufacturing Engineering,93(6), pp. 79–80, December 1984.
H. Asada and A. Fields, “Design of flexible fixtures reconfigured by robot manipulators”,Proceedings, Symposium on Robotics and Automation, ASME Winter Annual Meeting, Miami Beach, Fla. pp. 251–257, 1985.
P. J. Englert and P. K. Wright, “Applications of AI and the design of fixtures for automated manufacturing”,Proceedings, IEEE International Conference on Robotics and Automation, San Francisco, Calif., pp. 345–351, 7–10 April 1986.
F. B. Hazen and P. K. Wright, “Autonomous fixture loading by a machine tool”,Proceedings, Symposium on Manufacturing Systems—Design, Integration, and Control, Manufacturing International Conference, Atlanta, Ga., pp. 105–111, 1988.
S. J. Gordon and W. P. Seering, “Reconfigurable assembly fixtures”,Proceedings, Symposium on Manufacturing Systems—Design, Integration, and Control, Manufacturing International Conference, Atlanta, Ga., pp. 91–96, 1988.
K. Youcef-Toumi and J. H. Buitrago, “Design of robot-operated adaptable fixtures”,Proceedings, Symposium on Manufacturing Systems—Design, Integration, and Control, Manufacturing International Conference, Atlanta, Ga., pp. 113–119, 1988.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Trappey, J.C., Liu, C.R. A literature survey of fixturedesign automation. Int J Adv Manuf Technol 5, 240–255 (1990). https://doi.org/10.1007/BF02601534
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02601534