Abstract
Evaluation of form errors is specified by the ISO in terms of the minimum-zone concept. A method is proposed for numerically determining the form errors based on the minimum-zone evaluation, and a general criterion is given for arbitrating the form errors. A general procedure for “machine-intelligent” arbitration is developed for geometrical form errors. A geometrical adaptive control strategy is presented on the basis of machine-intelligent arbitration. The use of the control strategy provides a convenient structure for the control system and produces an optimal control procedure for the cutting and grinding processes.
Similar content being viewed by others
References
Y. L. Xiong, “On minimization of linear extreme difference and its applications”,Journal of Huazhong University of Science and Technology, 5, pp. 177–124, 1985.
Y. L. Xiong and S. P. Banks, “The pair of Lagrangian dual functions and Chebyshev approximation of functions”, Research Report no. 188, Department of Control Engineering, University of Sheffield, May 1982.
R. T. Rockafellar,Convex Analysis, Princeton University Press, 1970.
Y. L. Xiong, “Optimal design of manipulator arms by use of minimax techniques”,Proceedings of 15th International Symposium on Industrial Robots, Tokyo, September 1985.
E. H. Mamdani, “Application of fuzzy logic to approximate reasoning using linguistic synthesis”,IEEE Transactions on Computers,C26(12), pp. 1182–1191, December 1977.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Xiong, Y.L. Machine intelligence arbitration for geometrical form errors and geometrical adaptive control strategy. Int J Adv Manuf Technol 4, 298–310 (1989). https://doi.org/10.1007/BF02601528
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02601528