Résumé
Par suite de la raréfaction dans certaines régions françaises des sables alluvionnaires, habituellement utilisés pour les bétons hydrauliques, on a envisagé l'utilisation de sables issus du concassage de roches massives en tant que matériaux de substitution.
Douze natures minéralogiques de roches, représentant la plupart des natures de roches existant en France, ont été étudiées.
On a recherché:
-
- les limites acceptables de teneurs en fines des sables, du point de vue des propriétés des mortiers et des bétons à l'état frais et durci;
-
- l'évaluation des risques de réaction alcalis-granulat;
-
- les meilleures techniques d'élaboration industrielle des sables, afin que la teneur en fines et la granularité soient compatibles avec les résultats de la recherche sur mortiers et bétons.
Abstract
Because of the depletion in some parts of France of the alluvial sands normally used for hydraulic concretes, consideration has been given to using sands produced by crushing massive rocks as a substitute.
Rocks of twelve different mineralogical types, representing most of the types of rock found in France, have been investigated.
Attempts were made:
-
- to determine the maximum acceptable filler content of the sands, in terms of the properties of the mortars and concretes in both the fresh and hardened conditions;
-
- to assess the risks of alkali-aggregate reactions;
-
- and to work out the best techniques for the industrial production of these sands, so that the filler content and particle size distribution are compatible with the results of the research on mortars and concretes.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Coquillat, G., Lesage, R. Recherche de developpement d'emploi des sables issus de roches massives siliceuses et silicatees dans les betons hydrauliques. Bulletin of the International Association of Engineering Geology 30, 211–213 (1984). https://doi.org/10.1007/BF02594310
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02594310