Abstract
For highway construction and maintenance, between 200 and 300 million tons of mineral aggregates are used in the Federal Republic of Germany per year.
Most of the regionally occurring rocks, gravels and sands are sources of road materials of very good quality. However, depending on the locale, aggregates of minor quality may also have to be used for highway construction and maintenance for economic reasons and in order to protect the environment by avoiding greater haulage distances. For this purpose it has been necessary to adapt aggregate treatment and pavement design techniques to the rock materials available in each case.
A number of different tentative approaches to solving this problem have been put forward.
Résumé
200 à 300 millions de tonnes de granulats minéraux par an sont utilisées pour la construction et l'entretien routiers en République Fédérale d'Allemagne.
Les roches, les graves et les sables régionaux fournissent en grande partie des matériaux de très haute qualité. Selon les conditions locales il faut pourtant utiliser aussi pour la construction et l'entretien des routes des granulats de moindre qualité, et cela pour des raisons économiques et dans le but de protéger l'environnement en évitant de grandes distances du transport. Cela a exigé d'adapter la préparation et la construction des routes aux roches disponibles. On peut se servir de différentes variantes.
Similar content being viewed by others
References
Forschungsgesellschaft für das Straßenwesen (1978): Technische Lieferbedingungen für Mineralstoffe im Straßenbau TL Min 78, Köln.
Forschungsgesellschaft für das Straßen—und Verkehrswesen (1982): Technische Prüfvorschriften für Mineralstoff im Straßenbau, TP Min-StB, Köln, Teil 5.2.1.4.
Bundesminister für Verkehr, (1975): Richtlinien für den Straßenoberbau —Standardausführungen—RSt0 75, Bonn.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Adolf, T. Use of aggregates from regional deposits in road construction. Bulletin of the International Association of Engineering Geology 30, 137–139 (1984). https://doi.org/10.1007/BF02594295
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02594295