Summary
Laboratory processing and evaluation of engineering geological exploration by core drilling has to be coordinated with other exploration methods in conformity with the geological setup of the structure site. Processing requires an understanding of the engineering characteristics of the structures to predict their expected influence.
Processing is reasonably made according to a unified testing programme aiming at the test goal. Thereby results can be compared with earlier or later test results and evaluated uniformly. Based on petrographic, mass distribution, strength and technology model processes, the testing programme embraces all those tests likely to yield results that are indispensable for constructing hydraulic engineering structures.
Résumé
L'étude de laboratoire et évaluation des résultats produits par des essais effectués sur des carottes doivent être conformes à notre connaissance de la structure géologique de l'environnement mais aussi aux propriétés techniques de l'ouvrage d'art en question.
L'étude est toujours basée sur un programme d'essais unifié et élaboré pour le but spécial. Dans ce cas on a la possibilité de confronter les nouveaux résultats acev les anciens et la possibilité d'assurer l'interprétation généralisable.
Le programme d'étude repose sur les essais petrographiques de distribution des densités, de résistance et sur les effects des modèles employés et énumère tous les essais ayant de l'influence sur la construction des ouvrages d'art hydrauliques.
Similar content being viewed by others
References
ASSZONYI Cs.—RICHTER R. (1974): Bevezetés a kőzetmechanika reológiai elméletébe. (Introduction to the Rheological Theory of Rock Mechanics). NIM Továbbképző Központja, Budapest, p. 284.
GÁLOS M.—KERTÉSZ P.—KURTI I.—MAREK I. (1976): Kőzetvizsgálat és minősités. (Rock Testing and Classification). BME Továbbképző Intézete, 5019. sz. Jegyzet Tankönyvkiadó, Budapest, p. 112.
JUHÁSZ J. (1976): Hidrogeológia (Hydrology). Akadémaia Kiadó, Budapest, p. 767.
KERTÉSZ P. (1976): Mérnökgeológia (Engineering Geology). BME Épitőmérnöki Kar, Tankönyvkiadó, Budapest, p. 180.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gálos, M. A system of laboratory tests on drilled cores for preliminary engineering geology design in hydraulic engineering. Bulletin of the International Association of Engineering Geology 20, 91–93 (1979). https://doi.org/10.1007/BF02591255
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02591255