Summary
Starting from the losses in the ejectors occuring due to mixing and the streaming of the primary and the secondary flow, the conditions are decuded under which these losses are minimal. These conditions are used in order to obtain the relations between the fluid flow and the geometric parameters of the ejectors, from which the principal dimensions of the ejectors are determinable. The ejectors calculated in this way provide the maximal energy at the exit with given energies of primary and secondary flow at the entry and given flow coefficientμ of the ejectors. Using the deduced relations it is possible to determine a maximal flow coefficientμ of the ejectors in the case that both the energy of the primary and the energy of the secondary flow are given. This theoretical approach was confirmed experimentally.
Übersicht
Ausgehend von den Verlusten infolge des Durchflusses und der Mischung von Primär- und Sekundärströmung in Ejektoren werden Bedingungen hergeleitet, unter denen jene Verluste minimal sind. Aufgrund dieser Bedingungen erhält man Beziehungen zwischen der Durchströmung und den geometrischen Parametern der Ejektoren, aus denen deren Hauptabmessungen hergeleitet werden können. Die so berechneten Ejektoren liefern eine maximale Austrittsenergie bei gegebenen Eintrittsenergien der Primärund der Sekundärströmung und bei gegebenem Verhältnisμ der Massenströme der Ejektoren. Mittels der zuvor erwähnten Bedingungen ist es auch möglich, für gegebene Eintrittsenergien der Primär- und der Sekundärströmung einen maximalesμ zu bestimmen. Dieser theoretische Ansatz wurde experimentell bestätigt.
Similar content being viewed by others
References
Petrović, H. Lj.: Determination of optimal stream and geometric parameters of ejectros (in Serbocroatian). Ph. D. Thesis, Fac. of Mech. Eng., Beograd 1981
Schulz, F.: Fasol, K.: Wasserstrahl-Pumpe. Wien 1958
Smoldyrev, A.: Pipeline transport (in Russian). Moscow 1959
Kamenev, R.: Ejectors in industry (in Russian). Moscow 1964
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Šašić, M.T., Petrović, L.H. Determination of optimal flow and geometric parameters of ejectors. Ing. arch 57, 182–186 (1987). https://doi.org/10.1007/BF02570605
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02570605