Abstract
The results are analyzed for industrial tests of timely degassing of seam d6 which indicate that, in the recovery of methane of high concentration (95–98%), the gas content of the seam and the hazard of methane outburst are reduced. The technical-economic performance of this method is evaluated, and means of reducing its cost are proposed.
Similar content being viewed by others
References
N. V. Nozhkin,Timely Degassing of Coal Deposits, [in Russian], Nedra, Moscow (1979).
Temporary Handbook on Timely Preparation of Mine Fields for Effective Working by Boreholes from the Surface with Pneumohydraulic Treatment of Coal Beds in Light [in Russian], MGI, Moscow (1991).
Method of Determining the Hydraulic-Fracturing Parameters of Coal Seams in Planning Degassing in the Karaganda Basin [in Russian], Karaganda (1987).
Additional information
State Mining University, Moscow. Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 5, pp. 92–96, September–October, 1999.
Rights and permissions
About this article
Cite this article
Slastunov, S.V., Prezent, G.M. & Kolikov, K.S. Experimental work on methane recovery at the lenin mine of the Karaganda Basin. J Min Sci 35, 531–535 (1999). https://doi.org/10.1007/BF02562514
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02562514