References
V. M. Salganik, “Problems of improving the compactness and continuity of flat-rolled product lines,” Transactions of the First Congress of Rolling-Mill Operators, Chermetinformatsiya, Moscow (1996).
C. Mantovani, A. Carboni, E. Donini, and R. Borsi, “Flexible thin slab rolling—new challenge to improve production mix and quality,” METEC Congr. 94. 2nd Eur. Continuous Cast. Conf. and 6th Int. Roll. Conf. (Dusseldorf, June 20–22, 1994). Dusseldorf, Proc. V. 1. (1994), pp. 374–381.
“Quantensprung Fortschritte in der dunnbrammentechnologie,” Stalreport,48, No. 6, 14–15 (1993).
A. Wilson and J. Pietryka, “Die TSP-Technologie, ein neues varfahren zum Giessen und Walzenvon dunnbrammen,” Stahl und Eisen,114, No. 6, 149–155 (1994).
K. Ritner, V. Shmits, and A. Tsaiber, “Recent designs of units that incorporate the CSP casting-rolling technology for the economical and flexible production of high-quality hot-rolled strip,” Transactions of the First Congress of Rolling-Mill Operators, Chermetinformatsiya, Moscow (1996), pp. 99–101.
Yu. N. Belobrov, V. S. Stech, L. Ya. Raigorodetskii, et al., “Casting-rolling units. Models built by the Novokramatorsk Machine Factory for metallurgical plants,” Ibid. Transactions of the First Congress of Rolling-Mill Operators, Chermetinformatsiya, Moscow (1996), pp. 99–101.
G. I. Koval', “New principles in the technology and equipment for the step-rolling of strip metal,” Izv. Vysshikh. Uchebn. Zaved. Chern. Metall., No. 3, 29–31 (1997).
G. I. Koval'. Russian Federation Patent No. 1834724. Step-Rolling Method. Byul. Izobr., No. 30 (1993).
G. I. Koval' and V. G. Dremin, Step-Rolling Mill. Acceptance of Claim No. 94025092/02 from 27.03.95.
G. I. Koval', V. G. Dremin, A. R. Bezhanyan, et al., “New experimental step-rolling mills ShP150 and ShPU160, their development and testing,” in: Problems of the Development of the Metallurgy of the Ural on the Eve of the Twenty-First Century: Symposium. Magnitogorsk (1996).
Additional information
South Ural State University. Translated from Metallurg, No. 9, pp 42–43, September, 1998.
Rights and permissions
About this article
Cite this article
Koval', G.I., Dremin, V.G., Bezhanyan, A.R. et al. New SP500 mill for the step-rolling of skelp. Metallurgist 42, 356–358 (1998). https://doi.org/10.1007/BF02513021
Issue Date:
DOI: https://doi.org/10.1007/BF02513021