Abstract
Microtomography (micro-computed-tomography, μ-CT) is a method to image and quantify trabecular bone. It has the capability to address the role of trabecular architecture on the mechanical properties of bone and to study trabecular bone remodeling. The system described in this work is based on a compact fan-beam type tomograph that can work in spiral scanning or multislice mode. An X-ray tube with a microfocus is used as a source, a CCD-array as a detector. Samples with diameters from a few millimeters to a maximum of 14 mm can be measured, typically, bone biopsies with a diameter of 8 mm and a length of approximately 10 mm are measured. Spatial resolution is 28 μm. Usually the volume of interest contains 4×4×4 mm3 and is represented in 14×14×14 μm3 voxels. 3D stereological indices are extracted according to the standard definitions used in histomorphometry. Triangular surface representation is effected with an extended marching cube algorithm and forms a convenient basis for finite element analysis. Microtomographic measurements may be employed to “calibrate” lower-dose, lower-resolution imagesin vivo as well as to nondestructively assess unprocessed surgical bone biopsy specimens. These specimens remain intact for mechanical or histological testing.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Consensus Development Conference (1993) Diagnosis, prophylaxis and treatment of osteoporosis. Am J Med 94:646–650
Parfitt AM (1983) The stereologic basis of bone histomorphometry. Theory of quantitative microscopy and reconstruction of the third dimension. In: Recker R (ed) Bone histomorphometry. Techniques and Interpretation. CRC Press, Boca Raton, pp 53–87
Vogel M, Hahn M, Pompesius-Kempa M, Delling G (1989) Trabecular microarchitecture of the human spine. In: HG Willert, FHW Heuck (eds) Neuere Ergebnisse in der Osteologie, vol 4. Springer Verlag Heidelberg, pp 449–455
Mosekilde Li (1990) Consequences of the remodelling process for vertebral trabecular bone structure: a scanning electron microscopy study (uncoupling of unloaded structures). Bone Miner 10:12–34
Odgaard A, Gundersen HJG (1993) Quantification of connectivity in cancellous bone, with special emphasis on 3D reconstructions. Bone 14:173–182
Odgaard A, Andersen K, Ullerup R, Frich LH, Melsen F (1994) Three-dimensional reconstruction of entire vertebral bodies. Bone 15:335–342
Feldkamp LA, Goldstein SA, Parfitt AM, Jesion G, Kleerekoper M (1994) The direct examination of three-dimensional bone architecture in vitro by computed tomography. J Bone Miner Res 4:3–11
Bonse U, Busch F, Günnewig O, Beckmann F, Pahl R, Delling G, Hahn M, Graeff W (1994) 3D computed X-ray tomography of human cancellous bone at 8-μm spatial and 10−4 energy resolution. Bone Miner 25:25–38
Kinney JH, Lane NE, Haupt DL (1995) In vivo, 3D-microscopy of trabecular bone. J Bone Miner Res 10:264–269
Müller R, Hildebrand T, Rüegsegger P (1994) Non-invasive bone biopsy: a new method to analyse and display the three-dimensional structure of trabecular bone. Phys Med Biol 39: 145–164
DeHoff RT, Aigeltinger EH, Craig KR (1972) Experimental determination of the topological properties of 3D-microstructures. J Microscopy 95:69
Durand EP, Rüegsegger P (1992) High-contrast resolution of CT images for bone structure analysis. Med Phys 19:569–573
Glover GH, Eisner RL (1979) Theoretical resolution of computed tomography systems. J Comput Assist Tomogr 3:85–108
Joseph PM, Spital RD, Stockham CD (1980) The effects of sampling on CT images. Comp Tomogr 4:189–206
Lorensen WE, Cline HE (1987) Marching cubes: a high resolution 3D surface construction algorithm. Comput Graphics 21: 163–169
Parfitt AM, Drezner MK, Glorieux FH, Kanis JA, Malluche H, Meunier PJ, Ott SM, Recker RR (1987) Bone histomorphometry: standardization of nomenclature, symbols, and units. J Bone Miner Res, 2:595–610
Whitehouse WJ (1974) The quantitative morphology of anisotropic trabecular bone. J Microscopy 101:153–168
Goulet RW, Goldstein SA, Ciarelli MJ, Kuhn JL, Brown MB, Feldkamp LA (1994) The relationship between the structural and orthogonal compressive properties of trabecular bone. J Biomechanics 27:375–389
Müller R, Rüegsegger P (1994) Morphological validation of the 3D structure of non-invasive bone biopsies. Abstracts 10th Int. Workshop on Bone Densitometry. Bone Miner 25:S8
Müller R, Koller B, Hildebrand T, Gionolini S, Rüegsegger P (1995) Resolution-dependency of microstructural properties of cancellous bone based on three-dimensional μ-tomography. In: Pedotti R, Rabischong P (eds) Abstracts 3rd European Conference on Engineering and Medicine, 1995, vol 112
Engelke K, Graeff W, Meiss L, Hahn M, Delling G (1993) High spatial resolution imaging of bone using computed microtomography: comparison with microradiography and undecalcified histologic sections. J Invest Radiol 28:341–349
Hollister SJ, Fyhrie DP, Jepsen KJ, Goldstein SA (1991) Application of homogenization theory to the study of trabecular bone mechanics. J Biomechanics 24:825–839
Van Rietbergen B, Weinans H, Huiskes R, Odgaard A (1995) A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. J Biomechanics 28:69–81
Müller R, Rüegsegger P (1995) Three-dimensional finite element modeling of non-invasively assessed trabecular bone structures. Med Eng Phys 17:126–133
Dempster DW, Ferguson-Pell MW, Mellish RWE, Cochran GVB, Xie F, Fey C, Horbert W, Parisien M, Lindsay R (1993) Relationship between bone structure in the iliac crest and bone structure and strength in the lumbar spine. Osteoporosis Int 3:90–96
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rüegsegger, P., Koller, B. & Müller, R. A microtomographic system for the nondestructive evaluation of bone architecture. Calcif Tissue Int 58, 24–29 (1996). https://doi.org/10.1007/BF02509542
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02509542