Advertisement

Soviet Mining

, Volume 10, Issue 3, pp 308–314 | Cite as

The energy balance of the fracture process in certain rocks

  • F. Sekula
  • I. Kupka
  • P. N. Dzhaparidze
  • Ya. Beida
Rock Breaking
  • 17 Downloads

Conclusions

  1. 1.

    The authors have calorimetrically determined the energy emitted in the process of mechanical fragmentation of a solid. The difference between this and the energy supplied to the fragmented system is equal to the energy accumulated in the fragmented material.

     
  2. 2.

    There is found to be a linear relation between the energy irreversibly accumulated in the broken rock and bit and the energy supplied to the system which breaks the material. The same relation is established between the accumulated energy and the energy emitted in the form of heat during the fragmentation process, which can be measured calorimetrically.

     
  3. 3.

    Solutions are found for the problem of determining experimentally the work required to form unit surface area for isotropic solids of complex composition.

     

Keywords

Drilling Calorimeter Drilling Depth Break Rock Aluminum Cylinder 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature Cited

  1. 1.
    A. A. Griffith, Proceedings of First International Congress of Applied Mechanics, Delft, 1924 (C. B. Biezeno and I. M. Burgers, editors), Delft (1925), p. 55.Google Scholar
  2. 2.
    I. V. Obreimov, Proc. Roy. Soc., A, 127, 290, London (1930).Google Scholar
  3. 3.
    G. L. Cherepanov and V. Parton, in: Fifty Years of Mechanics in the USSR, [in Russian], Nauka, Moscow (1972).Google Scholar
  4. 4.
    V. D. Kuznetsov, The Surface Energy of Solids [in Russian], Gostekhteroetizdat, Moscow (1954).Google Scholar
  5. 5.
    I. J. Benbow and F. C. Roesler, Proc. Phys. Soc. London,70, 201 (1957).CrossRefGoogle Scholar
  6. 6.
    J. J. Gilman, “The atomic mechanism of fracture,” in: Proc. of International Conference (USA) [Russian translation], Chertsvetmetizdat, Moscow (1963).Google Scholar
  7. 7.
    E. Orowan, Welding J.,34, 157 (1955).Google Scholar
  8. 8.
    F. Sekula and I. Kupka, Physikomechanische Studien über die Felszenspannung, 2, Kongress der Internationalen Gesellschaft für Felsmechanik, Beograd (1970).Google Scholar
  9. 9.
    F. Sekula and I. Kupka, Metodika experimentalnij analysy distribucie energie pri rozpojovani Krehkych homin, Hornicka ostrava (1969).Google Scholar
  10. 10.
    P. N. Dzhaparidze, The Physicochemical Essence of the Strength Properties of Condensed Substances and Methods for Their Quantitative Expression [in Russian], Izd-vo AN GSSR, Tbilisi (1961), pp. 233, 135, 1.Google Scholar

Copyright information

© Plenum Publishing Corporation 1975

Authors and Affiliations

  • F. Sekula
  • I. Kupka
  • P. N. Dzhaparidze
  • Ya. Beida

There are no affiliations available

Personalised recommendations