Abstract
The error caused in the determination of the departure from roundness by profile discretization is studied. Corresponding estimates of the chord-length discretization with ana priori error allow the minimum number of points uniformly distributed on the profile that must be chosen to obtain a given accuracy.
Similar content being viewed by others
References
All-Union State Standard GOST 24642-81 (COMECON Standard ST SÉV 301-76). Tolerances of Surface Shapes and Distributions.
Yu. S. Syosev and V. Sh. Magdeev, Izmer. Tekh., No. 11, 27 (1990).
A. N. Avdulov, Checking and Estimation of Roundness of Machine Parts [in Russian], Izd. Standartov, Moscow (1974).
“Methods for the assessment of departures from roundness,” B. S. 3730 (1964).
A. Kynsojin et al., Bull. Jpn. Soc. Precis. Engng.,20, No. 4, 255 (1980).
O. N. Mel'nikov et al., USSR Inventor's Certificate 1,021,933; Otkr. Izobret., No. 21 (1983).
G. Hadviger, Lectures on Volume, Surface Area, and Isoperimetry [Russian translation], Nauka, Moscow (1966).
W. Blaschke, Circle and Sphere [Russian translation], Nauka, Moscow (1967).
Yu. S. Sysoev, Izmer. Tekh., No. 9, 22 (1995).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 1, pp. 42–47, January, 1997.
Rights and permissions
About this article
Cite this article
Sysoev, Y.S., Magdeev, V.S. & Manevich, V.V. Discretization of the profiles of large cylindrical products in analysis of shape deviations with allowance for evaluations of the curvature. Meas Tech 40, 63–70 (1997). https://doi.org/10.1007/BF02505168
Issue Date:
DOI: https://doi.org/10.1007/BF02505168