Abstract
Two methods of calculating correction factors for the measured short-range gain of tapered horns, a method of transmitting power from one aperture to the other and a method based on the geometric diffraction theory, are compared. The accuracy of correction factors is estimated from experimental data as a function of the parameter n=Rλ/D2.
Similar content being viewed by others
References
A. Z. Fradin and E. V. Pryzhkov,Measurement of Antenna Feeder Parameters [in Russian], Svyaz', Moscow (1972).
R. R. Bauman,Trans. IEEE,55, No. 6, 272 (1967).
E. V. Jull,Electronics Lett., No. 6, 680 (1970).
B. E. Kinber and V. B. Tseitlin,Radiotekh. Élektronika,9, No. 9, 1581 (1964).
I. R. Pace,IEEE Trans. Antennas Propag.,AP-17, No. 3, 285 (1969).
D. A. Hill and R. L. Ehret,Nat. Inst. Stand. Tech. (USA), NISTIR 89-3924 (1989).
A. C. Newell, R. C. Baird, and P. F. Wacher,IEEE Trans. Antennas Propag.,AP-21, No. 4 (1973).
D. G. Asatryan and L. A. Tetevosyan,Izmer. Tekh., No. 2, 47 (1991).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 11, pp. 59–63, November, 1998.
Rights and permissions
About this article
Cite this article
Arsaev, I.E., Yurchuk, É.F. & Zhuravlev, A.V. Accuracy of corrections for the measured short-range gain of microwave horn antennas. Meas Tech 41, 1072–1078 (1998). https://doi.org/10.1007/BF02503877
Issue Date:
DOI: https://doi.org/10.1007/BF02503877