Literature Cited
A. N. Korshunov and D. M. Dergunov, “Comparative tests of a disk roller bit and radial cutter under laboratory conditions,” in: Problems of Mechanization of Mining Operations [in Russian], Kuz. Politekh. Inst., Kemerovo, No. 46 (1972).
A. N. Korshunov, V. I. Nesterov, B. L. Gerike, and A. A. Silkin, “Investigation of the operating regimes of a disk roller bit during fracturing of rock inclusions,” in: Mechanization of Mining Operations [in Russian], Kuz. Politekh. Inst., Kemerovo, No. 1 (1977).
V. I. Nesterov, B. L. Gerike, and A. S. Shanin, “Investigation of the process of fracturing by disk roller bits,” in: Mechanization of Mining Operations, Kuz. Politekh. Inst., Kemerovo, No. 75 (1975).
D. L. Sikarskie and N. J. Altiero, “The formation of thips in the penetration of elastic-brittle materials (rock),” J. Appl. Mech., No. 40 (1973).
V. I. Nesterov and Yu. G. Polkunov, “Effect of geometric and regime parameters of a disk roller bit on the formation of the fracture surface,” in: Mechanization of Mining Operations [in Russian], Kuz. Politekh. Inst., Kemerovo (1986).
A. N. Korshunov, V. I. Nesterov, A. A. Khoreshok, et al., “Tests of a tool with disk roller bits,” Ugol'n. Mashinostr., TnNIIÉIugol', Moscow, No. 4 (1977).
A. N. Korshunov, D. F. Revskii, V. I. Nesterov, et al., “Experience in mining siltyshaly beds with solid inclusions,” Gorn. Zh., No. 4 (1984).
B. L. Gerike, A. B. Logov, and A. B. Raskin, Determination of Rational Parameters of Fracturing Hard Rocks by a Disk Shearing Tool [in Russian], Inzh. Upravl. Sib. Otd. Akad. Nauk SSSR, Kemerovo (1985). Dep. VINITI No. 7858-V.
V. M. Lizunkin, E. S. Volkov, V. M. Kravtsov, et al., “Tests of the cutter method of mining ores,” Gorn. Zh., No. 2 (1989).
A. N. Korshunov, V. I. Nesterov, B. L. Gerike, and A. A. Silkin, “Dynamic loads on the tool of a coal cutter equipped with disk roller bits,” in: Mechanization of Mining Operations [in Russian], Kuz. Politekh. Inst., Kemerovo (1978).
B. L. Gerike, A. B. Raskin, I. M. Fridman, and A. R. Petrushev, Loads in the Drive of a Narrow-Web Cutter-Loader During Fracturing of a Quartz Vein [in Russian], Inzh. Upravl. Sib. Otd. Akad. Nauk SSSR, Kemerovo (1985). Dep. VINITI No. 745-85 DEP.
Additional information
Engineering Administration, Siberian Branch, Academy of Sciences of the USSR, Kemerovo. Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 2, pp. 41–45, March–April, 1991.
Rights and permissions
About this article
Cite this article
Gerike, B.L. Qualitative characteristics of the process of fracturing hard rocks with a disk shearing tool and their quantitative assessments. Soviet Mining Science 27, 114–118 (1991). https://doi.org/10.1007/BF02500930
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02500930