Literature Cited
E. F. Kolesnikov, Determining the Drive Power for a Rotary Excavator, Stroitel'noe i dorozhnoe mashinostroenie (1956), No. 2.
V. Yu. Chudnovskii, Experimental Investigation of a Rotary Excavator of Theoretical Output 2100 m3/h, Izv. vuzov. Gorn. zh. (1962), No. 2.
N. N. Klige, Digging Resistance in the Operation of Rotary Excavators, Stroitel'nye i dorozhnye mashiny (1964), No. 1.
V. A. Kovrigin, Investigation of the Operation of a Rotary Excavator with Augmented Cutting Force, Gornye mashiny i avtomatika (1963), No. 7.
V. M. Vladimirov, V. P. Senchurov, and R. S. Shmerkovich, Comparison of Methods of Determining the Cutting Force on Buckets of a Rotary Excavator. Symposium, Perfecting Parameters of Industrial Processes in Open-Cut Workings, Moscow, TsNIITÉI (1964).
V. A. Kovrigin, Specific Digging Force of a Rotary Excavator, Gornye mashiny i avtomatika (1964), No. 7.
Yu. I. Belyakov, Use of Rotary Excavators in Winter, Moscow, Gosgortekhizdat (1962).
V. M. Vladimirov, Determining the Calculated Values of the Specific Cutting Resistance in the Operation of a Parametric Series of Rotary Excavators. Symposium, Mining, Road and Building Machinery, Kiev, Izd. “Tekhnika” (1965), issue 2.
N. V. Marich, Experimental Investigation of Energy Consumption on Cutting Ground to Determine Efficient Working Conditions for Rotary Excavators. KISI Symposium, Theory of Design and Use of Constructional Machinery, Izd. L'vovskogo un-ta (1964).
D. I. Fedorov and O. N. Mashkovich, Investigation of Conditions for Cutting Ground by the Rotary Excavator ÉRG-350/1000, Gornye mashiny i avtomatika (1963), No. 5.
G. A. Avigdor and V. A. Kovrigin, On the Ratio of the Work Done in Raising Ground in Working a Face by Horizontal and Vertical Slices, Izv. vuzov. Gorn. zh. (1963), No. 4.
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 2, pp. 98–105, March–April, 1966.
Rights and permissions
About this article
Cite this article
Vladimirov, V.M., Senchurov, V.P. & Shmerkovich, R.S. Improving the accuracy of calculations of the drive power for a rotary excavator. Soviet Mining Science 2, 188–193 (1966). https://doi.org/10.1007/BF02497759
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02497759