Abstract
The study carried out by seven European partners made it possible to develop a precast concrete paving product abrasion resistance test. This test has been adopted by the corresponding draft European Standards. It allows for direct testing of products or portions cut from products, whether they are new orin situ.
This report presents the main characteristics of the apparatus and how it is used.
Résumé
L'étude conduite par sept partenaires européens a permis de mettre au point un essai permettant de tester la résistance à l'abrasion des pavés, dalles et bordures en béton. Cet essai a été adopté par les projets de normes européennes correspondantes. Il permet la mesure directe sur produits ou sur échantillons découpés dans ceux-ci, que ce soit avant livraison ou une fois en place.
Ce rapport présente les principales caractéristiques du dispositif d'essai ainsi que ses conditions d'emploi.
Similar content being viewed by others
Bibliography
DIN 18500: ‘Cast stones; terminology requirements, testing, inspection’ (1991).
DIN 52108: ‘Testing the abrasive wear of inorganic non-metallic materials using the Boehme disk abrader’ (1988).
Shachel and Pearson, ‘Abrasion testing of concrete pavers’ (BIBM-1993).
Alexander, M.G., ‘Towards standard tests for abrasion resistance of concrete—Report on a limited number of tests studied, with a critical evaluation’,Mater. Struct. 18 (106) (1985).
NF P 98-303: ‘Concrete paving blocks’ (AFNOR, 1988).
Faucon, Ph., ‘Essais d'usure—Caractéristiques des principaux revêtements de sols durs’, Publication Technique CERIB No 46 (1979).
Author information
Authors and Affiliations
Additional information
Editorial note: M. Vallès works at CERIB (Centre d'Études et de Recherches de l'Industrie du Béton), a RILEM Titular Member.
Rights and permissions
About this article
Cite this article
Vallès, M. Abrasion test for precast concrete paving products. Mat. Struct. 30, 631–633 (1997). https://doi.org/10.1007/BF02486906
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02486906