Abstract
A novel method to separate and simultaneously record the Moiré interferometry fringe patterns of three deformation fields with only one CCD camera is developed; details of its operation principle, key points and error analysis are presented. With this technique, the deformation inU, V andW fields can be measured simultaneously, so dynamic test with comprehensive information can be performed. The advantage of this technique over other similar techniques lies in its simplicity, easy implementation and low cost. An application of this technique is given to show its feasibility. Technical problems that may be caused with this technique are also analyzed.
Similar content being viewed by others
References
Post D, Han B, Ifju P. High Sensitivity Moiré: Experimental Analysis for Mechanics and Materials. New York: Springer-Verlag, 1990
Han B, Guo Y. Thermal deformation analysis of various electronic packaging products by moiré and micro moiré interferometry.ASME, J Elect Packag, 1995, 117: 185–191
Epstein JS, Deason VA, Abdallah MG. Impact wave propagation in a thick composite plate using dynamic moiré interferometry.Opt and Las Eng, 1992, 17 (1): 35–46
Malgorzata Kujawinska. Automated moiré interferometry for local and global analysis of transient phenomena. EEP-Vol.10-2, Advances in Electronic Packaging, ASME, 1995
Yi S, Su F, Liu L. Experimental investigation on the complex thermo-mechanical behavior of plastic packages. In: Proceeding of the 3rd Int Conf on Exp Mech, Beijing, China, 2001
Mckelvie J. On moiré interferometry and the level of detail that it may reveal legitimately.Opt and Las Eng, 1990, 12: 81–99
Jenkins FA, White HE. Fundamentals of Optics, Fourth edition, Singapore: McGraw-Hill, 1981
Dai FL, Mckelvie J, Post D. An interpretation of moiré interferometry from wave front interference theory.Opt and Las Eng, 1990, 12: 104–118
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fei, S., Fulong, D., Kerm Sin, C. et al. Simultaneous recording of fringe patterns with one camera. Acta Mech Sinica 20, 642–648 (2004). https://doi.org/10.1007/BF02485868
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02485868