References
Assi, M., ‘Contribution à l'étude du comportement des enrobés à la fatigue en cission’, Thèse de Docteur Ingénieur, École Nationale des Ponts et Chaussées, 1981.
Brown, S. F. and Cooper, K. E., ‘Simplified methods for determination of fundamental material properties of asphalt mixes’, Proceedings of the International Conference SHRP And Traffic Safety On two Continents, The Hague, The Netherlands, 1993.
Charif, K. ‘Contribution à l'étude du comportement mécanique du béton bitumineux en petites et grandes déformations.’, Thèse de Doctorat, Ecole Centrale, Paris 1991.
Chauvin, J. J., ‘L'essai de module complexe utilisé pour la formulation des enrobés’, Proceedings of the Fourth International RILEM Symposium, Budapest, Ed. Chapman and Hall, 367–381, 1990.
De La Roche, C., ‘Module de rigidité et comportement en fatigue des enrobés bitumineux, expérimentations et, nouvelles perspectives d'analyse’, Thèse de Doctorat École Centrale, Paris, 1996.
De La Roche, C., Di Benedetto, H. and Doubbanneh, E., ‘Fiabilité des essais de module complexe sur enrobés. Comparison d'essais en flexion et en traction compression’, Int. Eurobitume Workshop, Performance Related Properties for Bituminous Binders, 1999.
Di Benedetto, H., ‘Nouvelle approche du comportement des enrobés bitumineux: résultats expérimentaux et formulation rhéologiqu’, Proceedings of the Fourth International RILEM Symposium, Budapest, Ed Chapman and Hall, 385–401, 1990.
Di Benedetto, H., ‘Reflection about the possible explanation for the test differences and recommendations’, Work Report for TG3, RILEM Technical Committee 152: Mechanical tests for bituminous mixes, Zurich, 1995.
Di Benedetto, H. and Des Croix, P., ‘Binder-mix rheology: limits of linear domain, non linear behaviourś, 1rst European Eurasphalt and Eurobitume Congress, May 1996.
Di Benedetto, H. and Francken, L., ‘Mechanical tests for bituminous materials, recent improvements and future prospects’, Proceedings of the Fifth International Rilem Symposium “Mechanical Tests for Bituminous Materials’ Lyon, France, 14–16 mai 1997, Editors Di Benedetto, H., Francken, L., 624, A. A. Balkema, 1997.
Di Benedetto, H. and De La Roche, C., ‘State of the art on stiffness modulus and fatigue of bituminous mixtures’, in “Bituminous binders and mixtures: state of the art and interlaboratory tests on mechanical behavior and mix design”, E&FN Spon, Ed. L. Francken, 137–180, 1998.
Doubbaneh, E., ‘Comportement mécanique des enrobés bitumineux des petites aux grandes déformations’, Thèse de Doctorat, Institut National des Sciences Appliquées, Lyon, ENTPE, 1995.
Francken, L. and Verstraeten, J., ‘Interlaboratory test program. Part II, Repeated loading tests’, Draft Report, RILEM TC 152-PBM, 1994.
Francken, L., Partl, M. N. and RILEM TC 152-PBM, ‘Complex Modulus Testing of Asphalt Concrete’, Account of a RILEM Interlaboratory Test Program. Paper presented to the Transportation Research Board Meeting, Washington, 1996.
Francken, L., ‘Bituminous binders and mixtures, State-of-theart and laboratory tests on mechanical behaviour and mix design’, RILEM Report 17, Ed Francken, E & FN Spon, 1998.
Francken, L. and Di Benedetto, H.et al., ‘Fifth RILEM Symposium on Mechanical Test methods for Bituminous Materials’,Mater. Struct. 31 (March 1998) 137–144.
Gubler, R., ‘Méthode d'essai par oscillation axiale pour la détermination des caractéristiques mécaniques et du comportement à la fatigue des asphaltes’, Proceedings of the Fourth International RILEM Symposium, Budapest, Ed. Chapman and Hall, 432–444, 1990.
Huet, C., ‘Étude par une méthode d'impédance du comportement viscoélastique des matériaux hydrocarbonés’, Thèse de Docteur Ingénieur, Faculté des Sciences de, l'Université de Paris, 1963.
Kennedy, T. W. and Huber, G. A., ‘The Superpave TM system-Superior performing asphalt pabements’,Strasse und Verkehr/ Route et Trafic 6 (Ed. VSS-Union des Professionnels Suisses de la Route) (June 1994) 347–354.
Lempe, U., Leykauf, G. and Neumann, U., Participation to the RILEM Interlaboratory Test Program-‘Part 2: Dynamic tests’, Research Report, Technical University of Munich, 1992.
Myre, J., ‘Fatigue of asphalt materials for Norwegian conditions’, Proceeding of the 7th International Conference on Asphalt Pavements, Nottingham, 1992, Vol. 3, 238–251.
Partl, M. N. and Francken, L., ‘RILEM interlaboratory tests on stiffness properties of bituminous mixtures’, Proceedings of the Fifth International RILEM Symposium MTBM, Lyon, France, 14–16, mai 1997, 15–26
Pronk, A. C., ‘Theory of the Four Point Dynamics Bending Test’, Research Report, DWW, The Netherlands, 1996.
Sousa, J. B., ‘Asphalt aggregate mix design using the simple shear test (Constant Height)’,Journal of the Association of Asphalt Paving Technologists (AAPT) 63 (1994).
Tayebali, A. A., Tsai, B. and Monismith, C. L., ‘Stiffness of Asphalt Aggregate Mixes’, Report n SHRP-A-388, Strategic Highway Research Program, National Research Council, Washington DC 1994.
William, M. L., Landel, R. F. and Ferry, J. D., ‘The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids’,J. of American Chemistry Society 20 (July 1955).
Witczak, M. and Pellinen, T. K., ‘AC mixture response comparison to performance E*-dynamic complex modulus end Eddynamic pulse wave velocity tests’, Superpave support and performance models management, NCHRP 9-19, Team Report SPT-WST-2(J6K), July 2000.
Additional information
The text presented hereafter is a draft for general consideration. Comments should be sent to the TC Chairman: Dr. Manfred N. Part, EMPA Swiss Federal Laboratories for Materials Testing and Research, CH-8600 Dübendorf, Switzerland Fax+41 1821 62 44; e-mail: manfred.partl@empa.ch by September 2001.
TC Membership: Chairman: M. N. Partl, Switzerland;Secretary: C. De La Roche, France;Regular Members: J. M.Barreian de Sousa, Portugal; R. J. H. Breuker, the Netherlands; Y. Brosseaud, France; M. Butcher, Australia; B. Eckmann, Belgium; A. Fidato, Italy; L. Francken, Belgium; R. Gubler, Switzerland; H. E. Höppel, Germany; M. Hugener, Switzerland; U. Isacsson, Sweden; M. Luminan Italy G. Peroni Italy; H. Piber, Austria; A. C. Pronk, the Netherlands; C. Raab, Switzerland; G. Ramond, France; O. Ruud, Norway; A. Saiz Gomez, Spain; O. J. Sveec, Canada; D. Sybilski, Poland; S. Toth, Hungary; A. Vanelstraete, Belgium; E. Vauthier, France; L. Zanzotto, CanadaCorresponding Members: E. O. Andersen, Noway; D. A. Anderson, USA; M. de Beer, South Africa; H. di Benedetto, France; P. Hopman, the Netherlands; I. Ishai, Israel; J. Judicki, Poland; E. Kuppens, the Netherlands, A. Paez, Spain; S. Palotta, Italy; I. Pallos, Hungary; S. Shatnawi, USA; M. Smiljanic, Jugoslavia; H. Soenen, Sweden; G. Svechinsky, Israel, B. Verhaege, South Africa, M. W. Witczak, USA.
Rights and permissions
About this article
Cite this article
Di Benedetto, H., Partl, M.N., Francken, L. et al. Stiffness testing for bituminous mixtures. Mat. Struct. 34, 66–70 (2001). https://doi.org/10.1007/BF02481553
Issue Date:
DOI: https://doi.org/10.1007/BF02481553