Abstract
The determination of the specific surface of porous solids and packed powders from measurements of gas and liquid permeability is described. The theoretical background is outlined, and suitable experimental techniques are discussed, involving both constant and variable gas pressures.
Résumé
On décrit la détermination de la surface spécifique des poudres comprimées d’après des mesures de perméabilité des gaz et des liquides. On examine l’équation de Kozeny-Carman et ses applications. On décrit les techniques expérimentales appropriées, comprenant les méthodes à pression constante (Lea et Nurse, Rigden) et les méthodes à pression variable (Blaine). On souligne l’importance de ces mesures pour les essais de matériaux et l’on cite les normes nationales correspondantes.
Similar content being viewed by others
References
Adzumi H.—Studies on the flow of gaseous mixtures through capillaries. III.The Flow of Gaseous Mixtures at Medium Pressures. Bull. Chem. Soc. Japan, 12 (1937), 292–303.
Anon.—Automatisch arbeitendes Blaine-Gerät zur Betriebskontrolle. Tonind.-Ztg. 78 (1954), 370.
ASTM C 204—68:Fineness of Portland cement by air permeability apparatus. November, 1968.
ASTM D 2752—68 T:Air permeability of asbestos fibers. September, 1968.
Barrer R.M..—An examination of the behaviour of adsorbed molecules by the flow of gases through microporous media. The Physics of Particle Size Analysis, Brit. J. Appl. Phys., Suppl, No. 3 (1954), S 49-S 55.
Blaine R.L.—Studies of the measurement of specific surface by air permeability. ASTM Bull. (1941), No. 108, 17–20.
Blaine R.L.—A simplified air permeability fineness apparatus. ASTM Bull. (1943), No. 123, 51–55.
BS 12: 1958:Portland cement (ordinary and rapid-hardening). March, 1958.
BS 4359: Part 2 1971:Methods for the determination of specific surface of powders. Part. 2.Air Permeability Methods. May, 1971.
Carman P.C.—Fluid flow through granular beds. Trans. Inst. Chem. Eng., 15 (1937), 150–166.
Carman P.C.—The determination of the specific surface of powders. I. J. Soc. Chem. Ind., Trans., 57 (1938), 225–234.
D’Arcy H.P.G.—Les Fontaines publiques de la Ville de Dijon. Patis: Victor Dalmont, 1856.
Hagen G.—Über die Bewegung des Wassers in engen zylindrischen Röhren. Pogg. Annal. Phys. Chem. (2), 16 (1839), 423–442.
Hasler M.—Automatisches und kontinuierliches Blaine-Meßgerät. Zement-Kalk-Gips, 25 (1972), 132–133.
Knudsen M.—Die Gesetze der Molekularströmung und der inneren Reibungsströmung der Gase durch Röhren. Ann. Physik, 28 (1909), 75–130.
Kozeny J.—Über kapillare Leitung des Wassers im Boden (Aufstieg, Versickerung und Anwendung auf die Bewässerung). Akad. Wiss. Wien, math.-naturwiss. Kl., Sitzungsber., Abt. IIa, 136 (1927), 271–306.
Lea F.M., Nurse R.W.—The specific surface of fine powders. J. Soc. Chem. Ind., Trans., 58 (1939), 277–283.
Lea F.M., Nurse R.W.—Permeability methods of fineness measurement: in “Symposium on Particle Size Analysis”. Suppl. to Trans. Inst. Chem. Eng., 25 (1947), 10 pp.
Lehmann H., Becker W.—Ein neues Eichverfahren für das Blaine-Gerät “System Dyckerhoff”, Tonind.-Ztg., 91 (1967), 204–206.
Lehmann H., Koltermann M..—Die Messung der spezifischen Oberfläche mit dem Gerät nach Blaine. Tonind-Ztg., 85 (1961), 233–235.
Niesel K.—External surface of powders from permeability measurements—A review has been published in «Silicates Industriels», 38 (1973) No. 4,69–76.
Nurse R.W.—Specification tests for specific surface of cements. Cement and Lime Manufacture, 24 (1951), 17–21.
Papadakis M., Lejean Y.—Etude d’un appareil manuel destiné au contrôle industriel de la surface spécifique des poudres. Rev. Matér. Constr. Trav. Publics (1963), No. 569, 48–51.
Pechukas A., Gage F.W.—Rapid method for determining specific surface of fine particles. Ind. Eng. Chem. 18 (1946), 370–373.
Poiseuille J.L.M.—Recherches expérimentales sur le mouvement des liquides dans les tubes de très petits diamètres. Compt. Rend. Acad. Sci. Paris, 11 (1841), 961, 1041; 12 (1841), 112.
Reekie J., Aird J.—Flow of water through very narrow channels and attempts to measure thermomechanical effects in water. Nature, 156 (1945), 367–368.
Ridgen P.J.—The specific surface of powders. A modification of the air-permeability method for rapid routine testing. J. Soc. Chem. Ind., Trans., 62 (1943), 1–4.
Ridgen P.J.—Flow of fluids through porous plugs and the measurement of specific surface. Nature, 157 (1946), 268.
Ridgen P.J.—The specific surface of powders. A modification of the theory of the air-permeability method. J. Soc. Chem. Ind., 66 (1947), 130–136.
Schmid A., Nyffenegger H..—Permeabilitätsvorrichtung. German Pat. (Fed. Rep.), 42 k, 49/02 (G 01 n), No. 1, 598, 280, 23 August 1966.
Spillane F.J.—An automatic direct-reading apparatus for determining the surface area of powders. Analyst, 82 (1957), 712–715.
Svensson J.—Determination of the specific surface of crushed and ground materials according to the gas permeability method. (in Swedish, English Summary). Jernkontorets Ann., 133 (1949), 33–86.
TGL 22201: Materialprüfung.—Bestimmung der spezifischen äußeren Oberfläche im Bereich von 50 bis 5000 cm 2/g. Permeabilitätsbestimmung unter stationärer Strömung. December, 1968.
Walther H.—Oberflächenmessungen an Sanden und Splitten. Silikattechn., 4 (1953), 25–31.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Niesel, K. Determination of the specific surface by measurement of permeability. Mat. Constr. 6, 227–231 (1973). https://doi.org/10.1007/BF02479037
Issue Date:
DOI: https://doi.org/10.1007/BF02479037