Abstract
In some Eastern European countries, the combined method Ultrasonic velocity—Rebound index is commonly used and has been officially standardized, for thein situ non-destructive testing of the strength of concrete.
This report presents the results of the application of this method in Italy on a certain number of sample concrete cubes of various composition. The error with respect to the corresponding results obtained by crushing was also analysed.
With particular reference to current Romanian recommendations, some modifications and extensions to this method, for application in Italy, are suggested.
Similar content being viewed by others
References
Facaoaru I.—Non-destructive testing of concrete in Romania. Paper of symposium on non-destructive testing of concrete and timber, London, June 1969.
Non-destructive methods of testing concrete. Review report, RR-2, Cement Research Institute of India, New-Delhi, December 1969.
Elvery R. H.—Non-destructive testing of concrete. The construction Industry Handbook, Medical and Technical Publishing Company Ltd, Aylesbury Bucks, 1971, pp. 75–82.
Jones R, Facaoaru I.—Instructiuni tehnice privind utilizarea metodelor nedistructive combinate la mâsurarea rezistentei la compresiune a betoanelor. Buletinul Constructiilor, No. 5, 1971.
Temporary instructions on control and evaluation of strength hardness and crack resistance of r. c., products and constructions by non-destructive methods, Stroiizdat, Moscow, 1971.
Uzopolyavichus B. U., Kudzis A—On reliability and accuracy of methods for indirect concrete strength determination in r. c. constructions, Concrete and reinforced concrete, No. 9, 1971.
Kornevitskaya, M. G., Lapenis T. U.—Development of methods for quality control of form manufactured products by means of non-destructive methods, Collection of papers Non-destructive quality control methods for precast reinforced concrete, MDNTP, 1971.
Detection of flaw and assessment of uniformity in the quality of concrete of Turbogenerator foundation units by non-destructive testing methods, SP-20 report, Cement Research Institute of India, New Delhi, October 1972.
Draft British Standard 4408—Recommendation for non-destructive methods of test for concrete, Part 5,The measurement of the velocity of ultrasonic pulses in concrete. British Standards Institution, London, June 1972.
Jones R., Facaoaru I.—Incercarea nedistructivă a betonului. Editura Tehnică, Bucureşti, 1972.
Non-destructive quality control methods for r. c. constructions. Collection of papers NIIZB, edited by G. I. Berdichevsky and V. A. Klevtsov, Stroiizdat, 1972.
Klevtsov V. A., Kornevitskaya, M. G., Lapenis T. U.—Automation of quality control of for manufactured products. Collection of papers Automation of precast r.c. concrete manufacture, MDNTP, 1972.
Kleinotas M. G.—Use of non-destructive methods for product quality control at house-building plant in Vilnus. Concrete and reinforced concrete, No. 8, 1973.
Assessment of concrete strength in reinforced concrete pedestals. SP-29 report, Cement Research Institute of India, New Delhi, September 1973.
Visvesvaraya, Raghavendra, Maiti—Application of combined method of non-destructive testing for the assessment of the quality of in situconcrete. RILEM, 2nd International Symposium, Vol. III, pp. 141–150, Constanta, România, 1974.
Klevtsov—Development and use of non-destructive methods for evaluation of strength, hardness and crack resistance of form-manufactured products for large-panel residential buildings. RILEM, 2nd International Symposium, vol. III, pp. 151–158, Constata, Romania, 1974.
Bob—Ultrasonic pulse and surface hardness methods for light-weight aggregate concrete. RILEM, 2nd International Symposium, Vol. III, pp. 159–167, Constanta, România, 1974.
Crisan, Bocan—Vérification expérimentale de l'efficacité de la méthode roumaine combinée (vitesse d'impulsioncoefficient de rebondissement) appliquée à un hôtel touristique. RILEM, 2nd International Symposyum, Vol. III, pp. 168–175, Constanta, România, 1974.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cianfrone, F., Facaoaru, I. Study on the introduction into Italy on the combined non-destructive method, for the determination ofin situ concrete strength. Mat. Constr. 12, 413–424 (1979). https://doi.org/10.1007/BF02478819
Issue Date:
DOI: https://doi.org/10.1007/BF02478819