Skip to main content

Glowing connections

Abstract

This paper gives the results of a series of experiments and how they shed light on problems of electrical fires. Experimental glowing connections were made by allowing wires to make poor contact with another object in series in a circuit.

This is a preview of subscription content, access via your institution.

References

  1. Meese, W. J. and Beausoliel, R. W., “Exploratory Study of Glowing Electrical Connections,” National Bureau of Standards, Building Science Series 103, 1977.

  2. Aronstein, J. and Campbell, W. E., “Failure and Overheating of Aluminum Wired Twiston Connections,” 27th Annual Conference on Electrical Contacts, Illinois Inst. of Tech., 1981.

  3. Aronstein, J., “Fire Due to Overheating Aluminum Wired Branch Circuit Connections: Electrical Fires,” Univ. of Wisconsin.

  4. Ettling, B. V., “Arc Marks and Gouges in Wires and Heating at Gouges,”Fire Technology, Vol. 17, No. 1 (1981), p. 61.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

Note: The information in this paper was presented in the course “Electrical fires” at the University of Wisconsin—Extension, Madison, Wisconsin, April 1982.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Ettling, B.V. Glowing connections. Fire Technol 18, 344–349 (1982). https://doi.org/10.1007/BF02473119

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02473119

Keywords

  • Oxide Layer
  • Voltage Drop
  • Copper Wire
  • Fire Technology
  • Aluminum Wired