Abstract
A study was undertaken to investigate the use of ASTM E 108 (NFPA 256, UL 790), Fire Tests of Roof Coverings, for testing roofmounted solar energy collectors. Data are presented showing the results of the testing conducted. An evaluation of the testing procedures as they apply to roof-mounted solar collectors is given.
Similar content being viewed by others
References
Fire Tests of Roof Converings, ASTM No. E 10880, American Society for Testing and Materials, Philadelphia, PA 19103 (1980).
Standard Methods of Fire Tests of Roof Coverings, NFPA No. 256, National Fire Protection Association, Boston, MA 02210 (1976).
Tests for Fire Resistance of Roof Covering Materials, UL No. 790, Underwriters Laboratories Inc., Northbrook, IL 60062 (1973).
HUD Intermediate Minimum Property Standards Supplement, 1977 Edition Solar Heating and Domestic Hot Water Systems, No. 4930.2, Dept. Housing and Urban Development (1977).
Recommended Requirements to Code Officials for Solar Heating, Cooling and Hot Water Systems, Dept. of Energy, DOE/CS/34281-01 (June 1980).
Waksman, D., Streed, E. R., Reichard, T. W. and Cattaneo, L. E., Provisional Flat Plate Solar Collector Testing Procedures: First Revision, National Bureau of Standards (U.S.) NBSIR 78-1305A (June 1978)
Walton, W. D. and Waksman, D., Fire Testing of Roof-Mounted Solar Collectors with ASTM E 108, National Bureau of Standards (U.S.), NBSIR 81-2344.
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Self-supporting Plastics in a Horizontal Position, ASTM No. D 635-77, American Society for Testing and Materials, Philadelphia, PA 19103 (1977).
Additional information
National Engineering Laboratory National Bureau of Standards
Note: Contribution of the National Bureau of Standards; not subject to copyright in the United States. David Waksman is on the staff of the Center for Building Technology, and William Walton is on the staff of the Center for Fire Research.
Rights and permissions
About this article
Cite this article
Waksman, D., Walton, W.D. Fire testing of solar collectors by ASTM E 108. Fire Technol 18, 174–186 (1982). https://doi.org/10.1007/BF02473107
Issue Date:
DOI: https://doi.org/10.1007/BF02473107