Abstract
Main specifications are formulated for methods of determining control measures of concrete quality. The expediency of applying combined methods in some cases is substantiated. The known approaches to the application of combined methods are summarized; they arise from the need to upgrade the reliability and accuracy of determining the control measure and to decrease the labour consumption of testing.
Résumé
On expose les principales spécificiations relatives aux méthodes de détermination des mesures de contrôle de qualité du béton. On établit le bien fondé de l'utilisation différentes approches connues pour l'application des méthodes combinées, qui résultent du besoin d'améliorer la fiabilité et la précision de la détermination de la mesure de contrôle et de diminuer l'effort investi dans l'essai.
Similar content being viewed by others
References
Skramtaev, B. G. and Leshchinsky, M. Yu., ‘Complex methods of nondestructive testing of concrete in construction and structural works’,Bull. RILEM 30 (1966) 99–105.
Bellander, U., ‘NDT testing methods for estimating compressive strength in finished structures—evaluation of accuracy and testing system’, in Proceedings, ‘Quality Control of Concrete Structures’, RILEM Symposium, Stockholm, June 1979, Vol. 1, pp. 37–45.
Facaoru, I. and Jones, R., ‘Incercarea Nedistructiua a Betonuli’ (Editura Technica, Bucuresti, 1971).
Logothetis, L. and Tassios, T. P., ‘In-situ assessment of concrete quality by means of three combined N.D. methods’, in Proceedings, ‘Quality Control of Concrete Structures’, RILEM Symposium, Stockholm, June 1979, Vol. 1, pp. 105–112.
Samarin, A. and Dhir, R. K., ‘Determination of in situ concrete strength: rapidly and confidently by nondestructive testing’, in Proceedings of International Conference, ‘In-Situ/Nondestructive Testing of Concrete’, Ottawa, October 1984 (CANMET, ACI) pp. 77–94.
ACI 228 1R-89, ‘In-Place Methods for Determination of Strength of Concrete’ (American Concrete Institute).
BS 1881. Part 201: 1986, ‘Guide to the Use of Non-Destructive Methods of Test for Hardened Concrete’ (British Standards Institution, London).
Leshchinsky, M. Yu., ‘Testing of Concrete’ (Stroiizdat, Moscow, 1980).
Leshchnisky, A. M., Goncharova, A. S. and Gorbunov, B. B. ‘Control of concrete stripping strength in the manufacture of precast products’,Arkhitectura i Stroitelstvo Uzbekistana 10 (1989) 3.
Nogin, S. I. and Shlyaktsu, M. I., ‘Correlation analysis of test results of concrete strength control by non-destructive methods’, in Proceedings, ‘Methods of Non-destructive Testing of Quality of Reinforced Concrete Structures’, Kiev, 1972, pp. 44–49.
Wonnacott, T. H. and Wonnacott, R. J., ‘Introductory Statistics’, 3rd edn (Wiley, New York, 1977).
Leschinsky, M. Yu. and Skramtaev, B. G., ‘Testing of Concrete Strength’, (Stroiizdat, Moscow, 1973).
GOST 22690-88, ‘Concretes. Strength Determination by Mechanical Nondestructive Methods’ (Gosstroy SSSR, Moscow).
BS 1881: Part 202: 1986, ‘Recommendations for Surface Hardness Testing by Rebound Hammer’ (British Standards Institution, London).
Petersen, C. G. and Hansen, A. J., ‘Timing of loading determined by pull-out and maturity test’, in Proceedings of RILEM International Conference on Concrete of Early Ages, Paris, 1982, Vol. 1, pp. 173–175.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Leshchinsky, A.M. Combined methods of determining control measures of concrete quality. Materials and Structures 24, 177–184 (1991). https://doi.org/10.1007/BF02472983
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02472983