References
Pielert, J. H. (ed.), Proceedings of Workshop on Evaluation of Cement and Concrete Laboratory Performance, Tel Aviv, lsrael, June 1989, Special Publication 788 (NIST, Gaithersburg, MD, 1990).
ISO Guide 2, ‘General terms and their definitions concerning standardization and related activities’ (1986).
ASTM E1187, ‘Terminology relating to laboratory accreditation’ (1989).
Schutz, P. and Sommer, H., ‘Test frequency and precision of results,’ in Proceedings of Workshop on the Evaluation of Cement and Concrete Laboratory Performance, Special Publication 788 (NIST, Gaithersburg, MD, 1990), pp. 43–46.
Rogers, J. A., ‘Current practice for assessing quality assurance systems in laboratoires,’ibid. in, pp. 6–17.
ISO Guide 25, ‘General requirements for the competence of calibration and testing laboratories’ (1990).
EN 45001, ‘General criteria for the operation of testing laboratories’ (1989).
ISO Guide 54, ‘Testing laboratory accreditation systems-general recommendations for the acceptance of accreditation bodies’ (1988).
ISO Guide 55, ‘Testing laboratory accreditation systems-general recommendations for operation’ (1988).
EN 45002, ‘General criteria for the assessment of testing laboratories’ (1989).
EN 45003, ‘General criteria for laboratory accreditation bodies (1989).
ASTM 1301, ‘Standard guide for development and operation of laboratory proficiency testing programs’ (1989).
ISO Guide 43, ‘Development and operation of laboratory proficiency testing’ (1984).
Sommer, H., ‘Experience with a cement reference laboratory in Austria,’ in Proceedings of Workshop on the Evaluation of Cement and Concrete Laboratory Performance, Tel Aviv, Israel, June 1989, Special Publication 788 (NIST, Gaithersburg, MD, 1990), pp. 97–100.
Wischers, G., ‘Comparative tests between 20 accredited laboratories,’ibid. in, pp 71–73.
Idem., ‘Cooperation between a central cement laboratory and 60 plant laboratories,’,ibid. in , pp. 101–103.
Vaittinen, K., ‘Comparative compression cube tests between approved testing laboratories in Finland,’ibid. in, pp. 111–115.
Hawthorn, F., ‘Experience with interlaboratory testing in France,’ibid. in, pp. 65–70.
Delort, M., ‘Interlaboratory programmes, round-robin tests,’ in Proceedings of RILEM/ILAC Symposium on Test Quality for Construction, Materials and Structures, St. Rémy-lès-Chevreuse, France, 1990, pp. 71–77.
Avudi, S., ‘An experience in compiling a laboratory quality manual,’ibid. Proceedings of RILEM/ILAC Symposium on Test Quality for Construction, Materials and Structures, St. Rémy-lès-Chevreuse, France, 1990, pp. 232–236.
Wright, P. J. F., ‘Compression testing machines for concrete,’The Engineer (April 26, 1957).
Atkinson, C., ‘British comparative cube testing program,’ in Proceedings of Workshop on the Evaluation of Cement and Concrete Laboratory Performance, Tel Aviv, Israel, June 1989, Special Publication 788 (NIST, Gaithersburg, MD, 1990), pp. 74–82.
Tipler, T. J., ‘New standard shows importance of comparative cube test,’Chartered Builder (February 1991) 16.
Jackson, P. J., ‘Five years of quality assurance in laboratories associated with the manufacture of Portland cements,’ in Proceedings of RILEM/ILAC Symposium on Test Quality for Construction, Materials and Structures, St. Rémy-lès-Chevreuse, France, 1990, pp. 202–206.
Pielert, J. H., ‘Construction materials reference laboratories at NIST-promoting quality in laboratory testing,ASTM Standardization News (December 1989) 40–44.
ASTM C1077, ‘Standard practice for laboratories testing concrete and concrete aggregates for use in construction and criteria for laboratory evaluation (1990).
ASTM 802, ‘Practice for conducting an interlaboratory test program to determine the precision of test methods for construction materials (1987).
Rights and permissions
About this article
Cite this article
Guideline for technical assessment of cement and concrete testing laboratories. Materials and Structures 25, 499–506 (1992). https://doi.org/10.1007/BF02472640
Issue Date:
DOI: https://doi.org/10.1007/BF02472640