Conclusions
Diffraction methods of analysis can be used for controlling materials in the production of various parts. As compared to traditional control techniques these methods are nondestructive and quite rapid.
Similar content being viewed by others
References
W. T. Langford, S. G. Snyder, and J. A. Bauscher, “New criteria for prediction of the press performance of deep drawing steels,”Trans. ASM,42, 1197–1233 (1950).
M. Fukuda, “Mathematical analysis of the relation between crystallographic texture and LangfordR-value in steel sheets,”Trans. Iron & Steel Inst. Jpn.,8, 68–77 (1968).
S. M. Vlad, “Verfahren zur Ermittlung der Textur-anisotropie in kohlenstoffarmen Feinblechen mittels inverser Polfiguren,”Mater. Pruf.,19, 99–103 (1977).
G. Pirvu, “Corelatii intre textura si Lagford parametreR,”Metallurgia (Romania),30(9), 497–501 (1978).
V. I. Yushkov, E. A. Mityushov, and P. A. Adamesku, “Relation between the crystallographic texture and the elastic and plastic anisotropy of metals with cubic lattice,”Fiz. Met. Metalloved.,67, Issue 1, 57–64 (1989).
A. N. Ivanov, A. E. Ostrov, and E. I. Fomicheva, “X-ray determination of sheet low-carbon steel,”Izv. Ross. Akad. Nauk, Defektoskop., No. 9, 36–40 (1993).
E. I. Semenov,Forging and Die Forging [in Russian], Mashinostroenie, Moscow (1975).
V. D. Kal'ner, A. N. Ivanov, and A. E. Ostrov, “X-ray control of the technological ductility of steels,”Zavod. Lab., No. 10, 33–38 (1988).
Yu. D. Yagodkin and A. N. Ivanov,Methods of Study of the Surface Layer (A Study Aid) [in Russian], MISiS, Moscow (1999).
N. V. Edneral, A. N. Ivanov, G. N. Kosyak, and E. I. Fomicheva, “X-ray measurement of the thickness of coatings,”Ivz. Ross. Akad. Nauk, Defektoskop., No. 9, 41–44 (1993).
B. G. Lifshits, A. S. Lileev, V. P. Menushenkov, Yu. A. Skakov, and Yu. D. Yagodkin, “A method for determining the perfection of magnetic and crystalline texture in permanent magnets based on SmCo5,”Zavod. Lab., No. 9, 836–839 (1979).
Yu. D. Yagodkin, E. V. Milyaeva, A. S. Lileev, et al., “X-ray study of the crystalline texture in permanent magnets based on Nd2Fe14B,” in:2nd National Conf. on the Use of X-ray, Synchromous Radiations, Neutrons and Electrons for Materials Research (Moscow, 23–27 May, 1999), Abs. Rep. [in Russian], IK RAN, Moscow (1999), p. 132.
D. M. Heiker and L. S. Zevin,X-Ray Diffractometry [in Russian], Fizmatgiz, Moscow (1963).
A. S. Lileev, Yu. D. Yagodkin, A. G. Savchenko, and V. P. Menushenkov, “Fast inspection of crystalline and magnetic texture in NdFeB magnets,” in:Proc. 6th Int. Conf. TECHNOLOGIA '99, Bratislava, 8–9 Sept., 1999, Vol. 1, pp. 130–134.
M. McLin and F. Shubert, “Mechanical properties of alloys and eutectics with directed crystallization,” in:High-Temperature Alloys for Gas Turbines [Russian translation], Metallurgiya, Moscow (1981), pp. 212–236.
Yu. D. Yagodkin, V. P. Shulyak, and V. B. Orekhov, “Mechanical properties of nickel alloy crystals with different crystallographic orientation,”Energomashinostroenie, No. 6, 30–32 (1987).
B. E. Pato, G. B. Stroganov, S. T. Kishkin, et al.,High-Temperature Strength of Cast Nickel Alloys and Their Protection from Oxidation [in Russian], Naukova Dumka, Kiev (1987).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 8, pp. 11–15, August, 2000.
Rights and permissions
About this article
Cite this article
Ivanov, A.N., Yagodkin, Y.D. Use of diffraction methods for technological control of materials. Met Sci Heat Treat 42, 304–308 (2000). https://doi.org/10.1007/BF02471305
Issue Date:
DOI: https://doi.org/10.1007/BF02471305