Metal Science and Heat Treatment

, Volume 39, Issue 4, pp 156–163 | Cite as

Effect of the rigidity of the stress state on the wear resistance of materials in hydraulic and impact abrasion wear

  • L. I. Pogodaev
  • Yu. N. Tsvetkov
  • N. F. Khomyakova
Friction. Wear


In the process of use many parts are subjected to the impact action of abrasive particles contained in a flow (jet) of gas or liquid and ones present on the contacting surfaces in the form of an abrasive layer. Despite the large number of publications devoted to problems of wear of parts, no universal criterion has been developed for evaluating the wear resistance of materials operating under various wear conditions. The present work concerns hydraulic and impact abrasion of various steels and alloys of nonferrous metals. In establishing the dependence of the wear resistance of the studied materials on their properties the authors take into account for the first time the rigidity of the stress state of the worn surface, which allows them to explain the special features of the behavior of the materials when subjected to various kinds of abrasion wear.


Wear Resistance Bainite Wear Surface Abrasion Wear Abrasive Particle 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    V. N. Vinogradov and G. M. Sorokin,Wear Resistance of Steels and Alloys [in Russian], Neft'i Gaz, Moscow (1994).Google Scholar
  2. 2.
    L. I. Pogodaev and N. V. Lukin,Operating Regimes and Endurance of Parts of Suction Dredges [in Russian], Transport, Moscow (1990).Google Scholar
  3. 3.
    L. I. Pogodaev and Yu. E. Ezhov, “Basic laws of hydraulic and impact abrasion wear of facing materials,”Trenie Iznos,12, 981–991 (1991).Google Scholar
  4. 4.
    G. A. Smirnov-Alyaev,Mechanical Foundations of Plastic Treatment of Metals [in Russian], Mashinostroenie, Leningrad (1968).Google Scholar
  5. 5.
    Yu. N. Tsvetkov and L. I. Pogodaev, “Determination of the coefficient of rigidity of the stress state of a metal surface in hydraulic abrasion,”Probl. Mashinostr. Nadezhn. Mashin (Mashinoved.), No. 6, 109–114 (1994).Google Scholar
  6. 6.
    Yu. N. Tsvetkov, “A study of the surface stress state of alloys in impact abrasion wear,” in:Collection of Works of St. Petersburg State University of Water Communications [in Russian] (1996).Google Scholar
  7. 7.
    A. A. Labutin,A Study of Mechanical Factors of Fracture in Metals Treated by Pressure, Author's Abstract of Candidate's Thesis, LMI (1966).Google Scholar

Copyright information

© Plenum Publishing Corporation 1997

Authors and Affiliations

  • L. I. Pogodaev
    • 1
  • Yu. N. Tsvetkov
    • 1
  • N. F. Khomyakova
    • 1
  1. 1.St. Petersburg State University of Water CommunicationsSt. PetersburgRussia

Personalised recommendations