Abstract
Boris Nikolaevich Kolachev is a doctor of science, professor of the K. É. Tsiolkovsky Moscow Aircraft Engineering Institute, honored scientist and engineer of the Russian Federation, full member of the New York Academy of Sciences winner of the Chernov prize (1968) and State Prize of the USSR (1986), and the author of 17 monographs 6 textbooks, and over 380 papers.
Similar content being viewed by others
References
V. A. Livanov, A. A. Bukhanova, and B. A. Kolachev,Hydrogen in Titanium [in Russian], Metallurgizdat, Moscow (1962).
G. V. Karpenko and R. I. Krilyakevich,Effect of Hydrogen on the Properties of Steel [in Russian], Metallurgizdat, Moscow (1962).
B. A. Kolachev,Hydrogen Embrittlement of Nonferrous Metals [in Russian], Metallurgiya, Moscow (1966).
L. S. Moroz and B. B. Chechulin,Hydrogen Embrittlement of Metals [in Russian], Metallurgiya Moscow (1967).
B. A. Kolachev, V. A. Livanov, and A. A. Bukhanova,Mechanical Properties of Titanium and Its Alloys [in Russian], Metallurgiya, Moscow (1974).
V. I. Shapovalov,Effect of Hydrogen on the Structure and Properties of Iron-Carbon Alloys [in Russian], Metallurgiya, Moscow (1982).
Yu. I. Archakov,Hydrogen Corrosion of Steel [in Russian], Metallurgiya, Moscow (1985).
B. A. Kolachev,Hydrogen Embrittlement of Metals [in Russian], Metallurgiya, Moscow (1985).
V. I. Shapovalov and V. V. Trofimenko,Flakes and Hydrogen Control in Steel [in Russian], Metallurgiya, Moscow (1987).
B. A. Kolachev, “Hydrogen embrittlement of metals,”Itogi Nauki Tekh., Metalloved. Term. Obrab.,23, 3–46 (1989).
A. D. Pogorelyi,The Theory of Metallurgical Processes [in Russian], Metallurgiya, Moscow (1971).
V. K. Nosov and B. A. Kolachev,Hydrogen Plasticizing in Hot Deformation of Titanium Alloys [in Russian], Metallurgiya. Moscow (1986).
B. A. Kolachev, “Reversible hydrogen alloying of titanium alloys,”Metalloved. Term. Obrab. Met., No. 10, 28–32 (1993).
B. A. Kolachev and V. D. Talalaev, “The hydrogen technology of titanium alloys,”Titan, No. 1, 43–46 (1993).
R. A. Andrievskii,The Metal Science of Hydrides [in Russian], Metallurgiya, Moscow (1986).
B. A. Kolachev, R. E. Shalin, and A. A. Il'in,Alloys That Accumulate Hydrogen [in Russian], Metallurgiya, Moscow (1995).
B. A. Kolachev, V. V. Sadkov, V. D. Talalaev, and A. V. Fishgoit,Vacuum Annealing of Titanium Structures [in Russian], Mashinostroenie, Moscow (1991).
A. G. Bratukhin, B. A. Kolachev, V. V. Sadkov, et al.,The Production Process of Titanium Aircraft Structures [in Russian], Mashinostroenie, Moscow (1995).
Chitu Georghe,Metallurgia, No. 8, 34–39 (1964).
V. N. Tsurkov, I. V. Paisov, and Yu. A. Bashnin, “Effect of heat treatment on the content and distribution of hydrogen in large forgings,”Stal', No. 8, 742–775 (1967).
V. V. Kuznetsov, G. V. Khldeev, and V. I. Kichigin,Hydrogen Charging of Metals in Electrolytes [in Russian], Mashinostroenie, Moscow (1993).
E. S. Tovpenets, T. M. Molodtsova, and E. N. Kotlyar, “Effect of hydrogen-relief annealing on the properties of steels 40Kh and 34Kh3M,”Metalloved. Term. Obrab. Met., No. 10, 64–66 (1966).
V. I. Zaika, V. A. Gashutin, V. A. Kharchenko, et al., “Development and substantiation of heat-treatment regimes for high-strength steels for removing hydrogen embrittlement,” in:Improving the Quality of Heat Treatment of Rolled Stock [in Russian], Moscow (1986), pp. 16–18.
B. A. Kolachev and A. V. Mal'kov,Physical Fundamentals of Titanium Fracture [in Russian], Metallurgiya, Moscow (1983).
I. Yu. Konnova, V. I. Malkin, and N. A. Pavlenko, “Mechanical properties, structure, and resistance to hydrogen embrittlement of low-alloy binary ferrite-martensite steels,” in.Improvement of Operational Characteristics of Steels and Alloys by Optimizing the Alloying and the Heat Treatment [in Russian], Moscow (1986), pp. 38–42.
A. Yu. Kazanskaya, M. A. Smirnov, and V. V. Zabil'skii, “Effect of high-temperature treatment on hydrogen embrittlement of structural steel,”Fiz. Met. Metalloved., No. 8, 201–203 (1990).
V. I. Malkin, I. Yu. Konnova, V. N. Zikeev, et al., “Effect of nickel content on the microstructure and susceptibility of hydrogen embrittlement of steel 09KhG2NAB,”Izv. Akad. Nauk SSSR, Met., No. 6, 128–132 (1986).
V. N. Zikeev, “Novel structural steel resistant to hydrogen embrittlement,”Stal', No. 3, 64–67 (1982).
“HIC resistant steel plates for pressure vessels,”Kobelcko Technol. Rev., No. 4, 45 (1988).
V. N. Zikeev, Yu. V. Kornyushenkova, V. V. Izvol'skii, et al., “Effect of copper and heat treatment regime on the resistance of steel 20KhM to cold hydrogen embrittlement,” in:Heat Treatment and Metal Science of Advanced Steels and Alloys [in Russian], Moscow (1983), pp. 46–48.
S. A. Golovanenko and T. K. Sergeeva, “Microstructural aspects of fracture in hydrogen embrittlement of gas-main steels,”Stal', No. 7, 73–78 (1984).
M. I. Gasik, Ch. D. Ismailov, V. V. Trofimenko, et al., “Nature of inclusions and hydrogen resistance of carbon steel modified by selenium or tellurium,”Izv. Vuzov. Chern. Met., No. 9, 52–56 (1988).
A. N. Rubtsov, Yu. G. Olesov, and M. M. Antonova,Hydration of Titanium Materials [in Russian], Naukova Dumka, Kiev (1981).
B. A. Kolachev, A. A. Il'in, and I. M. Mamonov, “Thermal hydrogen treatment of titanium alloys,” in:Metal Science and Heat Treatment of Titanium and High-Temperature Alloys [in Russian], VILS, Moscow (1991), pp. 132–142.
B. A. Kolachev, V. D. Talalaev, Yu. B. Egorova, et al., “On the nature of the favorable effect of hydrogen on the machinability of titanium alloys,” in:Science, Production and Use of Titanium under Conditions of Conversion [in Russian], Vol. 2, VILS, Moscow (1994), pp. 873–882.
B. A. Kolachev, V. V. Shevshenko, I. D. Nizkin, and P. D. Drozdov, “Theoretical substantiation of the manufacturing process of parts from titanium waste without its remelting,”Izv. Vuzov, Tsvet. Met., No. 4, 60–65 (1997).
A. M. Nadezhin and E. M. Bibikov, “A complex production process for fabricating quality cast parts from titanium alloys on the basis of hydrogen technology,” in:Science, Production, and Use of Titanium under Conditions of Conversion [in Russian], Vol. 1, VILS, Moscow (1994), pp. 263–274.
B. A. Kolachev, A. A. Il'in, and V. K. Nosov, “Hydrogen embrittlement as new perspective type of titanium alloy processing,” in:Advances in the Science and Technology of Titanium Alloy Processing, TMS, Warrendalle, Pennsylvania (1996), pp. 331–338.
A. A. Il'in, V. K. Nosov, and M. Y. Kollerov, “Hydrogen technology of semiproducts and finished goods production from high-strength titanium alloys,” in:Advances in the Science and Technology of Titanium Alloy Processing, TMS, Anaheim, California (1997), pp. 517–523.
A. V. Ovchinnikov, A. M. Mamonov, and V. M. Chugunova, “Operational characteristics of parts from alloy VT25U fabricated by hydrogen technology,” in:Science, Production, and Use of Titanium under Conditions of Conversion, 1st Int. CIS Conf. on Titanium [in Russian], VILS, Moscow (1994), pp. 492–499.
V. K. Nosov, A. A. Il'in, V. N. Uvarov, et al., “Hydrogen plasticizing and thermohydrogen treatment in fabricating semiproducts from alloys based on Ti3Al,” in:Science, Production, and Use of Titanium under Conditions of Conversion, 1st Int. CIS Conference on Titanium [in Russian], Vol. 2, VILS, Moscow (1994), pp. 668–674.
V. K. Nosov, S. B. Belova, and I. N. Chesnokov, “Ductility and deformation resistance of titanium alloy VT5-1 alloyed with hydrogen,”Metally, No. 6, 76–82 (1995).
B. A. Kolachev, A. V. Mal'kov, I. D. Nizkin, et al., “On the possibility of decreasing the temperature of hot heading of bolts from alloy VT16 by reversible alloying with hydrogen,”Izv. Akad, Nauk SSSR. Met., No. 3, 67–70 (1991).
R. J. Lederich, S. M. L. Sastry, and J. E. O'Neal, “Microstructure refining for superplastic forming optimization in titanium alloys,” in:Titanium Science and Technol., 5th Conf. on Titanium, Vol. 2, Munch. Oberursel (1984), pp. 695–702.
B. A. Kolachev and V. K. Nosov, “Hydrogen plasticizing and superplasticity of titanium alloys,”Fiz. Met. Metalloved.,57, Issue 2, 288–297 (1984).
W. R. Kerr, M. E. Smith, F. G. Rosenblum, et al., “Hydrogen, as an alloying element in titanium (hydrovac),” in:Titanium 80: Sci. Technol., Proc. 4th Int. Conf. on Titanium, Kyoto, 1980, pp. 2477–2486.
D. Eylon, F. H. Froes, and W. J. Barice, “Property improvement of titanium alloy castings by microstructure modification,” in:W.−Ti−Re−Sh'88, Proc. 1st Int. Conf. Beijing, Oxford, etc., 1989, Vol. 2, pp. 824–833.
Zhang Shaoging and Pan Feng, “Hydrogen treatment of cast Ti-6Al-4V alloy”Chin. J. Met. Technol., 6, 187–192 (1990).
F. H. Frous and J. E. Smugerski (eds.),Powder Metallurgy of Titanium Alloys [Russian translation], Metallurgiya, Moscow (1985).
Yang Ke, Zhou Chaohui, and Li Dongfa,Rare Metal Mater. Eng.,26(1), 11–18 (1997).
P. J. Mc Guiness, X. J. Zhang, X. J. Yin, and I. R. Harris, “Hydrogenation, disproprotionation and desorption (HDD): an effective processing route for Nd−Fe−B type magnets,”J. Less-Common Metals,158, 359–365 (1990).
W. R. Wampler, T. Schober, and B. Lengeler,Phil. Mag.,34, 129 (1976).
B. A. Kolachev, R. M. Gabidullin, and Yu. V. Piguzov,Heat-Treatment Technology for Nonferrous Metals and Alloys [in Russian], Metallurgiya, Moscow (1992).
F. Erdmann-Jesnitzer, “Hydrogen is a useful alloy element in metal alloys,” in:2nd Int. Cong. on Hydrogen in Metals. Paris, 1977, pp. 1–6.
V. A. Goltsov, “Hydrogen treatment of metals,”Int. J. Hydrogen Energy,22(43), 119–124 (1997).
Hydrogen Treatment of Materials, Coll. Inform. Mater. 1st Int. Conf. VOM-95, Donetsk, 1995 [in Russian].
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 3–11, March, 1999.
25th Chernov Lectures, November 27, 1998.
Rights and permissions
About this article
Cite this article
Kolachev, B.A. Hydrogen in metals and alloys. Met Sci Heat Treat 41, 93–100 (1999). https://doi.org/10.1007/BF02467692
Issue Date:
DOI: https://doi.org/10.1007/BF02467692