Advertisement

Metal Science and Heat Treatment

, Volume 39, Issue 6, pp 236–239 | Cite as

Shear bands in aluminum-lithium alloys

  • T. D. Rostova
  • V. V. Zakharov
Nonferrous Metals and Alloys

Abstract

Lithium-alloyed aluminum alloys possess substantial advantages over other aluminum-base alloys and can be a promising material for spacecraft engineering in the next century. At the present time the use of these alloys is limited by certain manufacturing difficulties. For example, the shear bands that appear in rolling of Al−Li sheets exert a negative effect on the properties of the alloys. In the present work shear bands are studied in Al−Li alloy 1460.

Keywords

Aluminum Alloy Shear Band Scandium Undesirable Phenomenon Transverse Strip 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    V. V. Zakharov and T. D. Rostova, “Shear bands in aluminum alloys,”Metalloved. Term. Obrab. Met., No. 4, 18–21 (1996).Google Scholar
  2. 2.
    V. I. Dobatkin, “On structural strengthening of aluminum alloys” in:Physical Metallurgy of Light Alloys [in Russian], Nauka, Moscow (1965), pp. 116–122.Google Scholar
  3. 3.
    V. I. Elagin, V. A. Tarasov, N. M. Shcheglova, and V. I. Popov, “Special features of structure of ingots and semiproducts of Al−Li alloys” in:Process Technology of Light and Special Alloys [in Russian], Metallurgiya, Moscow (1994), pp. 241–252.Google Scholar

Copyright information

© Plenum Publishing Corporation 1997

Authors and Affiliations

  • T. D. Rostova
    • 1
  • V. V. Zakharov
    • 1
  1. 1.All-Russia Institute of Light AlloysMoscowRussia

Personalised recommendations