Abstract
Plasma-powder facing is a method for creating a surface layer with a small thickness (1–2 mm) and high operating properties. The structure and the chemical and phase compositions of coatings of N73Kh16S3R3 powder deposited by plasma facing are studied by electron microscopy and microscopic x-ray spectral analysis.
We’re sorry, something doesn't seem to be working properly.
Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.
References
A. I. Sidorov,Restoration of Machine Parts by Spray-Coating and Facing [in Russian], Mashinostroenie, Moscow (1987).
M. Yu. Zashlyapin, G. E. Trekin, and O. I. Shevchenko, “Effect of structure and phase composition on the operational properties of the functional layer in plasma-powder facing of alloy N73Kh16S3R3,” in:State and Prospects of Restoration and Strengthening of Machine Parts, Abs. Rep. Conf. [in Russian], Issue 1, TsRDZ, Moscow (1994), pp. 84–87.
O. I. Shevchenko, V. M. Farber, V. I. Zhuravlev, et al.,Structure and properties of a facing of alloy N73Kh16S3R3, Dep. Chermetinformatsii 25.11.82, No. 5919, UPI, Sverdlovsk (1992).
O. I. Shevchenko, V. M. Farber, and V. I. Zhuravlev, “Structure and phase composition of a coating of N73Kh16S3R3 obtained by plasma facing,”Izv. Vuzov. Chern. Metallurg., No. 10, 23–26 (1992).
Yu. P. Oshchepkov and N. P. Oshchepkova, “Special features of structure formation in alloys of the Ni−Cr−B−C−Si system in induction facing,”Metalloved. Term. Obrab. Met., No. 10, 14–17 (1979).
O. I. Shevchenko, V. M. Farber, V. I. Zhuravlev, and V. N. Davydov,Effect of the parameters of plasma facing on the phase composition and structure of a coating of N73Kh16S3R3, Dep. Chermetinformatsii 25.11.92, No. 5918, UPI, Sverdlovsk (1992).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 5–7, June, 1997.
Rights and permissions
About this article
Cite this article
Shevchenko, O.I., Trekin, G.E. & Farber, V.M. Distribution of chemical elements in structural components of a facing of a self-fluxing nickel alloy. Met Sci Heat Treat 39, 233–235 (1997). https://doi.org/10.1007/BF02467225
Issue Date:
DOI: https://doi.org/10.1007/BF02467225