References
D. N. Garkunov,Triboengineering [in Russian], Mashinostroenie, Moscow (1985).
L. M. Rybakova and L. I. Kuksenova,Structure and Wear Resistance of Metal [in Russian], Mashinostroenie, Moscow (1982).
L. M. Rybakova and L. I. Kuksenova, in:Proc. Conf. Tribology “Friction, Lubrication and Wear-50 Years on”, JME, London (1987), pp. 419–426.
D. G. Gramakovskii, A. M. Lashmanov, and B. A. Ramanchev,Abs. Rep. III All-Union Conf. on the Physics of the Strength and Ductility of Metals and Alloys [in Russian], KPtI, Kuibyshev (1976), pp. 9–10.
A. A. Mukhamedov, in:Coll. of Works Int. Sci. Conf. “Friction, Wear and Lubricating Materials,” Vol. 3, Part 2 [in Russian], 12–16 (1985).
P. V. Nazarenko,Applied Mechanics, No. 2 [in Russian], KIIGA, Kiev (1972), pp. 20–24.
G. Andarelli, D. Maugis, and R. Courtel,Wear,2(1), 21–31 (1973).
N. P. Suh,Wear,25(1), 111–123 (1973).
Yu. N. Drozdov, L. M. Rybakova, I. P. Litvinov, et al.,Trenie Iznos,10(5), 773–778 (1989).
I. V. Kragel'skii, L. M. Rybakova, and A. N. Nazarov,Dokl. Akad. Nauk SSSR,250(3), 616–619 (1980).
B. I. Kostetskii (ed.),Surface Strength of Metals in Friction [in Russian], Tekhnika, Kiev (1976).
I. M. Lyubarskii and L. S. Palatnik,Metal Physics of Friction [in Russian], Metallurgiya, Moscow (1976).
V. N. Kashcheev,Processes in the Zone of Friction Contact of Metals [in Russian], Mashinostroenie, Moscow (1978).
N. A. Bushe and V. V. Kopyt'ko,Compatibility of Friction Surfaces [in Russian], Nauka, Moscow (1981).
S. I. Dyakin, in: D. N. Garkunov (ed.),Selective Transfer in Highly Loaded Friction Units, Coll. of Works [in Russian], Mashinostroenie, Moscow (1982), pp. 134–162.
P. A. Rebinder and E. D. Shchukin,Usp. Fiz. Nauk,108, Issue 1, 3–42 (1972).
D. N. Garkunov (ed.),Endurance of Rubbing Machine Parts, Issue 4 [in Russian], Mashinostroenie, Moscow (1990).
A. S. Kuzharov,Vestnik Mashinostr., Nos. 10–11, 18–24 (1992).
O. O. Shchekurin, É. B. Ivankina, N. G. Kazhaeva, and V. N. Frantsev, in:Abs. Rep. Int. Sci. Conf. “Friction, Wear and Lubricating Materials,” Vol. 5 [in Russian], Izd. AN SSSR, Moscow (1985), pp. 4–5.
L. I. Kuksenova, L. I. Rybakova, L. A. Vyacheslavova, et al.,Vestnik Mashinostr., No. 7, 11–16 (1988).
L. I. Kuksenova, L. A. Vyacheslavova, and L. M. Rybakova,Vestnik Mashinostr., Nos. 10–11, 13–18 (1992).
V. I. Savenko and E. D. Shchukin,Trenie Iznos,13(6), 1095–1107 (1992).
B. V. Namakonov, V. V. Kisel', and V. P. Lyalyakin, in:Endurance of Rubbing Machine Parts. Coll. of Works, Issue 4 [in Russian], Mashinostroenie, Moscow, 139–144 (1990).
L. I. Kuksenova, Yu. A. Nazarov, V. V. Kisel', et al.,Vestnik Mashinostr., No. 11, 28–36 (1994).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 41–48, July, 1999.
Rights and permissions
About this article
Cite this article
Kuksenova, L.I., Rybakova, L.M. & Lapteva, V.G. Problems of surface engineering in forming a wear-resistant structural state of metallic materials. Met Sci Heat Treat 41, 312–318 (1999). https://doi.org/10.1007/BF02466288
Issue Date:
DOI: https://doi.org/10.1007/BF02466288