Conclusion
Ion and electron kinds of treatment are promising processes for surface engineering, in particular, for treating high-temperature steels and alloys. Some of them are already employed in aircraft engineering. Others can be introduced after the creation of the requisite efficient and reliable equipment.
Similar content being viewed by others
References
“Surface modification of metals by ion beams-9,”Surf. and Coat. Technol.,83, 1–328;84, 329–614 (1996).
IVth All-Russia Conference on Modification of the Properties of Structural Materials by Beams of Charged Particles, 13–17 May 1996, Tomsk, Abs. Rep. [in Russian], Tomsk (1996).
“3rd Int. Workshop on Plasma-Based Ion Implantation, 15–18 Sept. 1996, Dresden, Germany,”Surf. and Coat. Technol.,93, 157–348 (1997).
“Interaction between ions and a surface,” in:Mat. XIII Int. Conf. 1–5 Sept. 1997, Zvenigorod, in 2 Vol. [in Russian], Moscow (1997).
S. A. Muboyadzhyan, E. N. Kablov, and S. A. Budinovskii,Metalloved. Term. Obrab. Met., No. 2, 15–18 (1995).
S. A. Muboyadzhyan, Ya. A. Pomelov, and R. I. Belyakova, in:Surface Layer, Precision, and Service Properties of Machine Parts and Equipment. Coll. of Works [in Russian], MDNTP, Moscow (1989), pp. 48–50.
V. G. Grigor'yan, A. A. Dal'skii, A. M. Sulima, et al.,Poverkhnost'. Fiz. Khim. Mekh., No. 4, 130–134 (1990).
Yu. D. Yagodkin, K. M. Pastukhov, S. A. Muboyadjyan, and E. N. Kablov,Surf. and Coat. Technol.,84, 590–593 (1996).
V. A. Shulov, A. E. Strygin, A. M. Sulima, et al.,Trenie Iznos,11(6), 1030–1038 (1990).
Yu. D. Yagodkin, K. M. Pastukhov, G. Vandendrisschi, et al.,Surf. and Coat. Technol.,89, 52–57 (1997).
Yu. D. Yagodkin,Itogi Nauki Tekh., Ser. Metalloved. Term. Obrab.,24, 167–221 (1990).
A. M. Sulima, V. A. Shulov, and Yu. D. Yagodkin, in:Improving the Quality of Parts in Machine Building [in Russian], MDNTP, Moscow (1988), pp. 11–16.
G. E. Remnev and A. D. Pogrebnyak,Novosti Nauki Tekh., Ser. Nov. Mater., Tekh. Proizv. Obrab., No. 2, 1–29 (1990).
V. A. Shulov, N. A. Nochovnaya, and G. E. Remnev,Mater. Sci. Eng.,A243, 290–293 (1998).
D. J. Rej, H. A. Davis, J. S. Olson, et al.,J. Vac. Sci. Technol. A,15(3), 1089–1097 (1997).
I. L. Pobol',Itogi Nauki Tekh., Ser. Metalloved. Term. Obrab.,24, 99–166 (1990).
N. N. Rykalin, A. A. Uglov, I. V. Zuev, and A. N. Kokora,Laser and Electron-Beam Treatment of Materials [in Russian], Mashinostroenie, Moscow (1985).
Yu. D. Yagodkin, K. M. Pastukhov, S. I. Kuznetsov, et al.,Fiz. Khim. Obrab. Mat., No. 5, 111–119 (1995).
Yu. D. Yagodkin, K. M. Pastukhov, and S. A. Muboyadjyan,Surf. and Coat. Technol.,93, 327–330 (1997).
Yu. D. Yagodkin, K. M. Pastukhov, S. A. Muboyadzhyan, et al., in:Abs. Rep. IV All-Russia Conf. on Modification of Structural Materials by Beams of Charged Particles, Tomsk, 13–17 May 1996 [in Russian], Tomsk (1996), pp. 276–278.
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 36–41, July, 1999.
Rights and permissions
About this article
Cite this article
Yagodkin, Y.D., Pastukhov, K.M., Muboyadzhyan, S.A. et al. Prospects for using flows of charged particles in surface engineering. Met Sci Heat Treat 41, 306–311 (1999). https://doi.org/10.1007/BF02466287
Issue Date:
DOI: https://doi.org/10.1007/BF02466287