Advertisement

Metal Science and Heat Treatment

, Volume 41, Issue 7, pp 292–300 | Cite as

Surface engineering: A way to provide maximum properties in articles

  • V. M. Zinchenko
Surface Engineering

Abstract

The example of cemented and cyanided gears is used to show that their maximum strength and service life can be provided only by methods of surface engineering that presuppose purposeful designing of the structure and phase composition of the most loaded zone of the gears, i.e., the teeth surface.

Keywords

Austenite Surface Engineer Core Hardness Gear Tooth Effective Thickness 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    V. M. Zinchenko, “High reliability of parts—a general problem for the designer and the production engineer,”Avtomob. Prom., Part I, No. 2, 26–28; Part II, No. 3, 27–29 (1997).Google Scholar
  2. 2.
    G. Henriot, “Advancement of gear drives,” in:Ékspress Inform. “Detali Mashin.” Issue 48 [in Russian] (1985).Google Scholar
  3. 3.
    L. S. Moroz and S. S. Shurakov,The Problem of the Strength of Cemented Steel [in Russian], Mintransmash, Leningrad (1947).Google Scholar
  4. 4.
    V. G. Vorob'ev, V. M. Zinchenko, B. G. Georgievskaya, et al.,Hardening of Steel Parts by Chemical Heat Treatment (Surface Saturation with Carbon and Nitrogen). Methods for Evaluating the Quality Parameters: Recommendations [in Russian], Izd. Standartov, Moscow (1976).Google Scholar
  5. 5.
    I. S. Kozlovskii,Chemical Heat Treatment of Gears [in Russian], Mashinostroenie, Moscow (1970).Google Scholar
  6. 6.
    H. Brugger, “Einsatzhärtung von Zahnrädern, Voraussetzung zur Erzielung reproduzierbar höher Zahnfusstagfähigkeit,”Antriebstechnik,18(9), 431–434, 437 (1979).Google Scholar
  7. 7.
    I. V. Bogolyubova, B. Z. Georgievskaya, and V. M. Zinchenko, “A study of the fracture mechanism in specimens of steel 12Kh2N4A as a function of the regimes of surface impregnation and heat treatment,”Metalloved. Term. Obrab. Met., No. 6, 2–4 (1988).Google Scholar
  8. 8.
    V. M. Zinchenko, “Ways to diminish gear deformation,”Avtomob. Prom, No. 11, 29–32 (1995).Google Scholar
  9. 9.
    V. M. Zinchenko, B. G. Georgievskaya, V. V. Kuznetsov, and V. A. Olovyanishnikov, “New methods of gas cementation and cyanidation,”Metalloved. Term. Obrab. Met., No. 10, 51–57 (1984).Google Scholar
  10. 10.
    V. M. Zinchenko, “Enhancement and stabilization of the strength properties and endurance of cemented and cyanided gears,”Metalloved. Term. Obrab. Met., No. 10, 26–19 (1987).Google Scholar
  11. 11.
    V. L. Meleshkin and V. M. Zinchenko, “Automatic control of the carbon potential of furnace atmospheres,”Metalloved. Term. Obrab. Met., No. 8, 64–67 (1978).Google Scholar
  12. 12.
    ”A method for determining nitrogen components in a diffusion layer, Inv. Certif. No. 88292,”Otkr. Izobr., No. 43, 86 (1981).Google Scholar
  13. 13.
    V. M. Zinchenko, B. G. Georgievskaya, and V. A. Olovyanishnikov, “Effect of retained austenite on the mechanical properties of cemented steels,”Metalloved. Term. Obrab. Met., No. 12, 25–30 (1987).Google Scholar

Copyright information

© Kluwer Academic/Plenum Publishers 2000

Authors and Affiliations

  • V. M. Zinchenko
    • 1
  1. 1.NIITavtoprom Joint-Stock CompanyMoscowRussia

Personalised recommendations