References
O. A. Bannykh, V. M. Zinchenko, B. A. Prusakov, and V. Ya. Syropyatov, Advancement of Nitriding in Russia (Lakhtin Memorial Lecture) [in Russian], Izd. MGTU, Moscow (1998).
H. C. P. Rozendaal, E. J. Mittemeijer, P. P. Colijin, and P. J. Van der Schaaf,Metall. Trans.,14A, 395–399 (1983).
J. Pan, M. Hu, L. Mao, et al., in:Heat Treatment Shanghai '83. The Metals Society, London (1984), pp. 1.11 1.17
K. H. Jack, in:Heat treatment '73', The Metals Society, London (1975), pp. 39–50.
B. J. Lightfoot and K. H. Jack, in:Heat treatment '73', The Metals Society, London (1975), pp. 59–68.
Y. Sun and T. Bell, in:Proc. 9th Int. Cong. on Heat Treatment and Surface Engineering, Nice, France, September 1994, IFHT, p. 385.
Y. Sun, C. Newby, E. Strobach, and T. Bell, in:Proc. 4th Int. Seminar of IFHT “Environmental and energy efficient heat treatment technologies,” Beijing, China, September 1993, p. 46.
J. A. Mohandesi and R. Priestner, in:Heat Treatment '81', The Metals Society, London (1983), pp. 207–214.
B. Edenhofer and T. J. Bewley, in:Heat Treatment '76', The Metals Society, London (1978), pp. 7–13.
H. Oettel and B. Ehrentraut,Haert. Tech. Mitt.,40, 183 187 (1985).
M. A. Nosratinia,PhD thesis, University of Birmingham, UK (1995).
G. Schreiber, H. Oettl, W. Darbingian, and W. Wiedemann, in: V. Hauk et al., (ed.),Residual Stresses, DGM Informationsgesellschaft, Oberursel (1993), pp. 965–974.
M. A. J. Somers and E. J. Mittemeijer,Metall. Trans.,21A, 189 204 (1990).
P. C. Van Wiggen, H. C. R. Rozendaal, and E. J. Mettemeijer,J. Mater. Sci.,20, 4561–4582 (1985).
S. Zeng,MPhil thesis, University of Birmingham, UK (1995).
H. Oettel and G. Schreiber, in:Nitrieren und Nitrocarburieren, Arbeitsgemeinschaft Waermebehandlung und Werkstofftechnik, Wiesbaden (1991), pp. 139–131.
P. Buchhagen and T. Bell,Comp. Mat. Sci.,7, 228–234 (1996).
M. Samandi, B. A. Shedden, D. I. Smith, G. A. Collins, R. Hutchings, and J. Tendys, in:Surf. Coat. Technol.,59, 261 (1993).
M. Samandi, B. A. Shedden, T. Bell, G. A. Collins, R. Hutchings, and J. Tendys,J. Vac. Sci. Technol.,B12, 935 (1994).
M. Samandi, X. Li, and B. A. Shedden, in:Proc. Conf. on “Microscopy: Materials and Techniques,” Sydney, Australia, September 1993, Institute of Metals and Materials, Australia, p. 31.
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 6–16, July, 1999.
Rights and permissions
About this article
Cite this article
Bell, T. First Lakhtin Memorial Lecture. Met Sci Heat Treat 41, 277–286 (1999). https://doi.org/10.1007/BF02466283
Issue Date:
DOI: https://doi.org/10.1007/BF02466283