Abstract
To improve resolution of seismic-reflection profiles in continental slope water depths of 900 to 1500 m, a single hydrophone was towed about 150 m off the bottom to receive reflected signals from a surface-towed sparker sound source. That deep-towed hydrophone data show that valleys which appear V-shaped in records from a surface-towed hydrophone are flat-bottomed, and that subbottom reflections from an erosional unconformity can be much better resolved. The data produced by this technique are very hepful when used in conjunction with records from conventional surface-towed seismic-profiling equipment.
Similar content being viewed by others
References
Robb, J. M., Hampson, J. C., and Twichell, D. C., 1981. Geomorphology and sediment stability of a segment of the U.S. continental slope off New Jersey. Science, v. 211, p. 935–937.
Krause, D. C., 1962. Interpretation of echo sounding profiles. Internat. Hydrog. Rev., v. 39, p. 65–123.
van Overseem, A. J. A., 1978. Shallow-penetration, high-resolution subbottom profiling. Marine Geotechnology, v. 3, p. 61–84.
Ewing, M., Embley, R. W., and Shipley, T. H., 1973. Observations of shallow layering utilizing the Pingerprobe echo-sounding system. Marine Geology, v. 14, p. M55-M63.
Tucholke, B. E., 1979. Furrows and focused echoes on the Blake Outer Ridge. Marine Geology, v. 31, p. M13-M20.
Purdy, G. M., Ewing, J. I., and Bryan, G. M., 1980. A deep-towed hydrophone seismic reflection survey around IPOD sites 417 and 418. Marine Geology, v. 35, p. 1–19.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Robb, J.M., Sylwester, R.E. & Penton, R. Simplified method of deep-tow seismic profiling. Geo-Marine Letters 1, 65–67 (1981). https://doi.org/10.1007/BF02463304
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02463304