Abstract
In this paper, the eigenequation of notch in Reissner plate is derived by the eigenfunction method. Eigenvalues of different notches with different angles are calculated by Muller iteration method. The expression of stress and strain at the tip of notch in Reissner plate is obtained.
Similar content being viewed by others
References
Williams, M.L., Stress singularities resulting from various boundary conditions in angular corners of plates in extension.J. Appl. Mech.,14 (1952), 526–528.
Bogy, D.B., Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions,J. Appl. Mech.,38 (1971), 377–386.
Ting, T.C. and Jin Yi-jian, Eigen-functions at a singular point in transversely isotropic materials under axisymmetric deformations,J. Appl. Mech.,52 (1985), 565–570.
Somaratna, Nihal and T.C.T. Ting, Three-dimensional stress singularities at conical notches and inclusions in transversely isotropic materials,J. Appl. Mech.,53 (1986), 89–96.
Williams, M.L., Surface stress singularities resulting from various boundary conditions in angular corners of plates under bending,J. Appl. Mech.,28 (1961), 325–328.
Sih, G.C., P.C. Paris and F. Erdogan, Crack tip stress intensity factors for plane extension and plate bending problems,J. Appl. Mech.,29 (1962), 306–312.
Knowles, J.K. and N.M. Wang, On the bending of an elastic plate containing a crack,J. of Math. and Phy.,39 (1960), 223–236.
Liu Chun-tu, Stress and deformation near tip of crack in plate under bending,J. of Solid Mech.,3 (1983), 441–447.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jun, Q., Yu-qiu, L. The expression of stress and strain at the tip of notch in reissner plate. Appl Math Mech 13, 315–324 (1992). https://doi.org/10.1007/BF02451417
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02451417