Abstract
Most neuroprostheses which use integrated circuits protect these chip components in a hermetic package. No satisfactory method of sealing such an enclosure has been found which does not use metals. Therefore, in general, the seal is an electrically conducting ring. If induction is used to supply power to this device, this ring will be a ‘short-circuited turn’ which will affect the performance of the inductive link. In the paper, theory is presented for a model in which the metallic seal is a tertiary inductance, coupled to the primary and secondary. The tertiary has finite Q. Equations for this model are given from which formulae for the gain and efficiency are derived for the particular condition of tuning that the carrier frequency equals the resonant frequency of both the primary and secondary circuits. From the formulae, gain curves are plotted which show how the seal affects the link. However, it is clear that general solutions to the problem are needed if the theory is to be of practical use.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Donaldson, N. de N. andPerkins, T. A. (1983) Analysis of resonant coupled coils in the design of radio frequency transcutaneous links.Med. & Biol. & Comput.,21, 612–627.
Donaldson, N. de N. (1983) Voltage regulators for implants powered by coupled coils.,21, 756–761.
Donaldson, N. de N. (1984) A noble spring-clip: fatigue-resistant electrical connection for implant use.J. Biomed. Eng.,6, 237–241.
Donaldson N. de N. (1986) A 24-output implantable stimulator for FES. Proc. 2nd Vienna International Workshop on Functional Electrostimulation, International Society for Artificial Organs, 21st–24th Sept., 197–200.
Donaldson, N. de N. (1988) Low-technology sealing method for implantable hermetic packages.Med. & Biol. Eng. & Comput.,26, 111–116.
Donaldson, P. E. K. (1973) Experimental visual prosthesis.IEE Proc.,120, 281–298.
Donaldson, P. E. K. andSayer, E. (1981) A technology for implantable hermetic packages. Part 1. Design and materials.Med. & Biol. Eng. & Comput.,19, 398–402.
Donaldson, P. E. K. (1987) Twenty years of neurological prosthesis-making.J. Biomed. Eng.,9, 291–298.
Galbraith, D. C., Soma, M. andWhite, R. L. (1987) A wideband efficient inductive transdermal power and data link for coupling insensitive gain.IEEE Trans.,BME-34, 265–275.
Peckham, P. H., Poon, C. W., Ko, W. H., Marsollais, E. B. andRosen, J. J. (1981) Multichannel implantable stimulator for control of paralyzed muscle.,BME-28, 530–536.
Rushton, D. N. (1990) Choice of nerves or roots for multichannel leg controller implant. InAdvances in external control of human extremities, X.Popovic, D. (Ed.), Nauka, Belgrade.
Solar, R. J. (1982) Materials for cardiac pacemaker encapsulation. InBiocompatibility in clinical practise.Williams, D. F. (Ed.), CRC Press, 211–224.
Takamori, T. (1979) Solder glasses. InTreatise on materials science and technology, Vol. 17 Glass II. Eds:Tomozama andDoremus, Academic Press.
Terman, F. E. (1943)Radio engineers handbook. McGraw-Hill Book Co., New York and London, 67, 53.
Traeger, R. K. (1977) Nonhermeticity of polymeric lid sealants.IEEE Trans.,PHP-13, 147–152.
Troyk, P. R., Watson, M. J. andPoyezdela, J. J. (1986) Humidity testing of silicone polymers for corrosion control of implanted medical electronic prostheses. InPolymeric materials and corrosion control.Dickie, R. A. andFloyd, F. L. (Eds.), American Chemical Society Symposium Series No. 322, 299–311.
White, M. L. (1969) Encapsulation of integrated circuits.Proc. IEEE,57, 1610–1615.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Donaldson, N.d.N. Effect of the metallic seal of a hermetic enclosure on the induction of power to an implant. Med. Biol. Eng. Comput. 30, 63–68 (1992). https://doi.org/10.1007/BF02446195
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02446195