Skip to main content
Log in

Electro-osmotic valve for the controlled administration of drugs

  • Published:
Medical and Biological Engineering and Computing Aims and scope Submit manuscript

Abstract

An implantable electro-osmotic valve for the controlled and continuous administration of medication is under development. The objective is to regulate the amount of drug to be released. The driving force behind this valve is a liquid with a vapour pressure above 1 bar (100 kPa) which presses the solution under question through the membrane. The rate of flow is additionally controlled by the current passing through the membrane. In a typical example the performance characteristics of this electro-osmotic valve are: 0·4 μW/cm2 at 40 μA/cm2 for a flow rate of 0·025 cm3/d.cm2 under a pressure of 1·5 bar (150 kPa). Thus in a system with a membrane area of 5 cm2, the rate of release is 0·125 cm3/day. The aim is to store about 10 to 50 ml of the drug solution within the body and to release it at a rate of 0·1 cm3 to 1 cm3 per day. It is also planned to refill the delivering system after the drug is discharged.

Sommaire

Une soupape d’électro-osmose implantable est en voie de développement, pour assurer l’administration contrôlée et continue d’un médicament. L’objectif est de régulariser la quantité de médicaments devant être relâchée. La force motrice derrière cette soupape est un liquide d’une pression de vapeur supérieure à 1 bar, qui introduit la solution en question dans la membrane. Le rythme du débit est en outre contrôlé par le courant passant dans la membrane. Voici un exemple type des caractéristiques de performance de cette soupape d’électro-osmose: 0·4 μW/cm2 à 40 μA/cm2 pour un rythme de débit de 0·025 cm3/cm2 par jour, sous une pression de 1·5 bar. Ainsi, le régime de relâchement est de 0,125 cm3 par jour pour un système à surface de membrane de 5 cm2. Le but est d’emmagasiner de 10 à 50 ml de solution chimique dans le corps et de la relâcher au rythme de 0·1 cm3 par jour. Il est aussi conçu pour remplir le système de distribution après de relâchement du médicament.

Zusammenfassung

Es wird ein implantier bares elektro-osmotisches Ventil zur kontrollierten, kontinuierlichen Medikamentenverarbreichung entwickelt. Ziel ist die Steuerung der freigesetzten Medikamentenmenge. Das Ventil funktioniert mit einer Flüssigkeit die einen Dampfdruck über 1 besitzt, welcher die betreffende Lösung durch die Membran preßt. Die Durchflußrate wird zusätzlich mittels eines durch die Membran geleiteten Stroms geregelt. Ein typisches Beispiel für die Leistung dieses Ventils ist: 0·4 μW/cm2 bei 40 μA/cm2 für eine Durchflußrate von 0·025 cm3/dcm2 bei einem Druck von 1·5 b. Das heißt, bie einem System mit einer Membranfläche von 5 cm2 beträgt die Freisetzungsrate 0·125 cm3/pro Tag. Ziel ist die Deponierung von etwa 10 bis 50 ml der Medikamentenlösung im Körper, die dann mit 0·1 cm3 bis 1 cm3 pro Tag nach und nach freigesetzt wird. Außerdem kann die Abgabevorrichtung nach Freisetzung des Medikaments wieder aufgefüllt werden.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Blackshear, P. J., Rohde, T. D., Varco, R. L. andBuchwald, H. (1975) One year of continuous heparinization in the dog using a totally implantable infusion pump.Surg. Gyn. & Obstet. 141, 176–186.

    Google Scholar 

  • Luft, G., Kühl, D. andRichter, G. J. Electroosmotic pump for steady, Regulated or controlled release of medicaments.Biomedizinische Technik—in press.

  • Rohde, T. D., Blackshear, P. J., Varco, R. L. andBuchwald, H. (1975) Chronic heparin anticoagulant in dogs by continuous infusion with a totally implantable pump.Trans. Amer. Soc. Artif. Int. Organs XXI, 510–514.

    Google Scholar 

  • Thomas, I. J. Jun. andBessman, S. P. (1975) Prototype for an implantable micropump powered by piezoelectric disc benders.Trans. Amer. Soc. Artif. Int. Organs XXI, 516–520.

    Google Scholar 

  • Yum, Su II andEckenhoff, J. B. (1976) Osmotically powered miniature implantable pump. Digest of the 11th International Conference on Medical and Biological Engineering, Ottawa, p. 130–131.

  • Zaffaroni, A. (1976) Drug delivery systems—a problem area of biomedical engineering. Presented at Medex 76, 15th–18th June, 1976, Basel/Schweiz.

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Luft, G., Kuehl, D. & Richter, G.J. Electro-osmotic valve for the controlled administration of drugs. Med. Biol. Eng. Comput. 16, 45–50 (1978). https://doi.org/10.1007/BF02442931

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02442931

Keywords

Navigation