Abstract
Based on investigation into four aspects of qualitative mechanical analysis, principle model experiments, engineering dynamic load tests and numerical calculation, it was discussed that the transfer of stresses and accelerations in stratum medium have a close relation with its relative rigidity. The concepts of stresses and accelerations transfer in solid medium and its corresponding generalized, composite structure system are presented. The survivability of underground engineerings and protective engineering will be greatly increased if these concepts are correctly used in construction.
Similar content being viewed by others
References
XUE Da-wei, ZHAO Yu-xiang. Minutes of the symposium on the high resistance composite structure of tunnels[R]. Luoyang Hydraulic Engineering Technical Institute, 1987. (in Chinese)
ZHAO Yu-xiang. The model test research and theoretical analysis by the dynamic load device with 400 tonnages capacity for materical test[R]. Luoyang Hydraulic Engineering Technical Institute, 1992. (in Chinese)
ZHAO Yu-xiang. The dynamic test research and theoretical analysis on the high resistance composite structure by explosive simulator[R]. Luoyang Hydraulic Engineering Technical Institute, 1996. (in Chinese)
ZHAO Yu-xiang. The explosive test research on the high resistance composite structure for tunn [R]. Luoyang Hydraulic Engineering Technical Institute, 1987. (in Chinese)
LIANG Jiong-jun.Development of the Technology and Concepts of Geotechnical Engineering[M]. Beijing: Press of China University of Mining & Technology, 1998, 28–29. (in Chinese)
ZHAO Yu-xiang. The model test research on underground opening by the loading apparatus of PYD-50[R]. Luoyang Hydraulic Engineering Technical Institute, 1987. (in Chinese)
ZHAO Yu-ziang. The design and calculating method for the high resistance composite structure for tunnels[R]. Luoyang Hydraulic Engineering Technical Institute, 1988. (in Chinese)
Author information
Authors and Affiliations
Additional information
Contributed by Xue Da-wei
Biographies: Zhao Xiao-bing (1976≈)
Rights and permissions
About this article
Cite this article
Xiao-bing, Z., Da-wei, X., Yu-xiang, Z. et al. Concepts of mechanical parameters transfer in solid medium and its application in engineerings. Appl Math Mech 25, 143–151 (2004). https://doi.org/10.1007/BF02437315
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02437315