Abstract
Mathematical modeling and optimization of fabrication of PVA-PGMA graft copolymers were conducted. The optimum parameters of graft polymerization which allow obtaining a graft copolymer with a high concentration of graft polymer were established. It was found that fluctuation of the temperature in the range of ±2‡C did not significantly affect graft polymerization. A chemisorption fibre with SEC for HCl of 3.5 mmole/g was fabricated from PVA-PGMA graft copolymers; it exhibits sorption activity with respect to copper ions, and the degree of extraction from dilute solutions is 90–97%.
Similar content being viewed by others
References
N. V. Bytsan, O. E. Kazakevich, et al., Zh. Prikl. Khim.,61, No. 12, 2707–2712 (1988).
N. Yu. Mosina, T. V. Druzhinina, et al., Khim. Volokna, No. 3, 6–9 (1996).
N. Yu. Mosina and T. V. Druzhinina, Khim. Volokna, No. 5, 46–49 (1996).
A. S. Aleksandriiskii, T. V. Druzhinina, et al., Khim. Volokna, No. 1, 29–31 (1991).
A. S. Aleksandriiskii, N. P. Tsukanova, et al., Khim. Volokna, No. 5, 34–35 [sic].
T. V. Druzhinina, A. N. Emel'yanova, and N. Yu. Mosina, Khim. Volokna, No. 5, 51–55 (1995).
T. A. Roven'kova, Experimental Design in Production of Chemical Fibres [in Russian], Khimiya, Moscow (1977).
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskie Volokna, No. 3, pp. 13–16, May–June, 1998.
Rights and permissions
About this article
Cite this article
Druzhinina, T.V., Emel'yanova, A.N., Nazar'ina, L.A. et al. Fabrication of chemisorption fibres from graft copolymers of polyvinyl alcohol and polyglycidyl methacrylate. Fibre Chem 30, 145–149 (1998). https://doi.org/10.1007/BF02430475
Issue Date:
DOI: https://doi.org/10.1007/BF02430475