Experimental Mechanics

, 44:593 | Cite as

Improved experimental tracking techniques for validating discrete element method simulations of tumbling mills

  • I. Govender
  • A. T. McBride
  • M. S. Powell
Article

Abstract

We report on further developments in the three-dimensional tracking of a particle deep within the tumbling ball charge of an experimental mill. The experimental X-ray program employing the use of bi-planar X-ray angiography now includes the tracking of a typical 6 mm bulk charge particle in three dimensions with a spatial resolution that is accurate to within 0.15 mm. The improved experimental tracking techniques presented were developed for the purpose of generating accurate three-dimensional particle trajectory data against which to validate a numerical method for the simulation of discrete media, namely the discrete element method (DEM). These improvements are complimented with techniques for comparing charge profiles between numerical DEM simulations and three-dimensional experimental trajectory data.

Key Words

Template matching angiography comminution discrete element method 

References

  1. 1.
    Cundall, P.A. andStrack, O.D.L., “A Discrete Numerical Model for Granular Assemblies,”Geotechnique,29 (1),47–65 (1979).CrossRefGoogle Scholar
  2. 2.
    Mishra, B.K. andRajamani, R.K., “Simulation of Charge Motion in Ball Mills: Experimental Verification and Numerical Simulation,”International Journal of Mineral Processing,40,171–197 (1994).CrossRefGoogle Scholar
  3. 3.
    Cleary, P.W. andHoyer, D., “Centrifugal Mill Charge Motion and Power Draw: Comparison of DEM Predictions with Experiment”,International Journal of Meneral Processing, 59, 131–148 (2000).CrossRefGoogle Scholar
  4. 4.
    Govender, I., Powell, M.S., andNurick, G.N., “Automated Imaging Technique to Track the 3D Motion of Particles,”E-upxperimental Mechanics,42 (2),153–160 (2002).Google Scholar
  5. 5.
    Govender, I., Balden, V., Powell, M.S., and Nurick, G.N. “Validated DEM-Potential Major Improvements to SAG Mill Modeling,” Proceedings of SAG'01 Conference, Vancouver, Canada (2001).Google Scholar
  6. 6.
    Govender, I., Powell, M.S., andNurick, G.N., “3D Particle Tracking: A Rigorous Technique for Verifying DEM,”Minerals Engineering,14 (10),1329–1340 (2001).CrossRefGoogle Scholar
  7. 7.
    McBride, A., Govender, I., Powell, M.S., andCloete, T., “Contributions to the Experimental Validation of the Discrete Element Method Applied to Tumbling Mills,”Engineering Computations: International Journal for Computer-aided Engineering,21 (2),119–136 (2004).CrossRefMATHGoogle Scholar
  8. 8.
    Canny, J., “A computational Approach to Edge Detection,”IEEE Transactions on Pattern Analysis and Machine Intelligence,”8 (6),679–698 (1986).CrossRefGoogle Scholar
  9. 9.
    Chow, C.K. andKaneko, T., “Automated Boundary Detection of the Left Ventricle from Cineagiograms,”Computers and Biomedical Research,5,388–410 (1972).CrossRefGoogle Scholar
  10. 10.
    Fitzgibbons, A.W., Stable Segmentation of 2D Curves, PhD thesis, University of Edinburgh (1998).Google Scholar
  11. 11.
    Karara, H.M. and Abdel-Aziz, Y.I., “Direct Linear Transformation From Comparator Coordinates into Object Space Coordinates in Close-range Photogrammetry”, ASP Symposium on Close-range Photogrammetry, American Society of Photogrammetry, Falls Church, VA (1971).Google Scholar
  12. 12.
    Marzan, G.T. and Karara, H.M., “A Computer Program for a Direct Linear Transformation Solution of the Collinearity Condition, and Some Applications of it,” Proceedings of the Symposium on Close- range Photogrammetric System, American Society of Photogrammetry, Falls Church, VA, 420–476 (1975).Google Scholar
  13. 13.
    Karara, H.M. (editor),Non-topographic Photogrammetry, Science in Engineering Series, 2nd edition, American Society for Photogrammetry and Remote Sensing, Falls Church, VA (1989).Google Scholar
  14. 14.
    Shi, G.H., “Three-dimensional Discontinuous Deformation Analysis,” Proceedings of the 4th International Forum on Discontinuous Deformation and the Simulation of Discontinuous Media, Glasgow, UK, 1–21 (2001).Google Scholar
  15. 15.
    Cook, R.D., Malkus, D.S., and Plesha, M.E., Concepts and Applications of Finite Element Analysis 3rd edition, Wiley, New York.Google Scholar
  16. 16.
    Thompson, E.H., An Introduction to the Algebra of Matrices with Some Applications, Adam Hilger, Bristol, 299 (1969).MATHGoogle Scholar
  17. 17.
    Cleary, P.W., Morrison, R., andMorrell, S., “Comparison of DEM and Experiment for a Scale Model SAG Mill,”International Journal of Minerals Processing,68,129–165 (2003).CrossRefGoogle Scholar
  18. 18.
    Cleary, P.W., “Predicting Charge Motion, Power Draw, Segregation, Wear and Particle Breakage in Ball Mills Using Discrete Element Methods,”Minerals Engineering,11,1061–1080 (1998).CrossRefGoogle Scholar
  19. 19.
    Venugopal, R. andRajamani, R.K., “3D Simulations of Charge Motion in Tumbling Mills by the Discrete Element Method,”Powder Technology,115,157–166 (2001).CrossRefGoogle Scholar
  20. 20.
    Lorenz, A., Twozzolo, C., andLouge, M.Y., “Measurements of Impact Properties of Small, Nearly Spherical Particles,”Experimental Mechanics,37, (3),292–298 (1995).CrossRefGoogle Scholar
  21. 21.
    McBride, A.T., Proceedings of the 11th International Comminution Research Workshop: The Application of Computational Techniques to Industrial Comminution Problems, Cape Town, South Africa, September 26–28 (2003).Google Scholar
  22. 22.
    Powell, M.S. andNurick, G.N., “A Study of Charge Motion in Rotary Mills. Part 1: Extension of the Theory,”Minerals Engineering,9 (2),259–268 (1996).CrossRefGoogle Scholar
  23. 23.
    Powell, M.S., “The Effect of Liner Design on the Motion of the Outer Grinding Media in a Rotary Mill,”International Journal of Minerals Processing,31,163–193 (1991).CrossRefGoogle Scholar

Copyright information

© Society for Experimental Mechanics 2004

Authors and Affiliations

  • I. Govender
    • 1
  • A. T. McBride
    • 1
  • M. S. Powell
    • 1
  1. 1.Mineral Processing Research Unit, Department of Chemical EngineeringUniversity of Cape TownSouth Africa

Personalised recommendations