References
L. S. Borovich, Keyless Joints in Machine Components [in Russian], Mashgiz, Moscow (1951).
A. V. Charnko and A. I. Timchenko, “Shaped joints of shafts and bushings in machine building,” Vestn. Mashinostr., No. 1, 33–37 (1981).
R. M. Sukhomlinov, Trochoidal Rotary Compressors [in Russian], Vishcha Shkola, Khar'kov (1975).
V. M. Men'shakov, G.-P. Uralapov, and V. S. Sereda, Chipless Taps [in Russian], Mashinostroenie, Moscow (1976).
V. M. Sinkevich, “Principle of turned sinusoidal shapes for keyless joints and their geometries,” Tekhnolog. Susostr., No. 7, 48–53 (1974).
USSR Author's Certificate No. 1579636, MKI V 23 b 1/00, “A method for the machining of shafts.”
USSR Author's Certificate No. 1827331, MKI V 23 b 1/00, “A method of machining noncircular shafts and openings and equipment for its implementation.”
USSR Author's Certificate No. 1740135, MKI V 23 b 1/00, “A method for the machining of shafts and openings and equipment for its implementation.”
USSR Author's Certificate No. 683868, MKI V 23 b 1/00, “A method for the machining of components and equipment for its implementation.”
USSR Author's Certificate No. 1779478, MKI V 23 b 1/00, “A method for the multipass machining of openings.”
S. G. Lakirev and S. G. Chinenov, Mathematical Modeling and New Principles for the Forming of Noncircular Surfaces [in Russian], Part 1, Chelyabinskyi Gosudarstvennyi Tekhnicheskyi Universitet, Chelyabinsk (1994).
S. G. Lakirev and S. G. Chinenov, Mathematical Modeling and New Principles for the Forming of Noncircular Surfaces [in Russian], Part 2, Chelyabinskyi Gosudarstvennyi Tekhnicheskyi Universitet, Chelyabinsk (1994).
USSR Author's Certificate No. 1838047, MKI V 23 b 1/00, “A method for machining shafts and openings and equipment for its implementation.”
USSR Author's Certificate No. 1782696, MKI V 23 b 1/00, “A method of machining noncircular surfaces and equipment for its implementation.”
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 5, pp. 71–72, September–October, 1996.
Rights and permissions
About this article
Cite this article
Lakirev, S.G., Chinenov, S.G. & Solov'eva, T.P. New fabrication procedure for noncircular cylindrical surfaces with a central axis of symmetry. Chem Petrol Eng 32, 510–514 (1996). https://doi.org/10.1007/BF02416595
Issue Date:
DOI: https://doi.org/10.1007/BF02416595