Skip to main content
SpringerLink
Log in

Modification of reinforced polymer materials in a static magnetic field

  • Published:
Fibre Chemistry Aims and scope

Abstract

Different magnetic treatments were investigated and recommendations were made concerning industrial application of magnetic treatment of fibres freshly impregnated with binders in fabrication of reinforced PCM to strengthen them significantly, as the most simple, economical, and efficient type of magnetic treatment. A correlation was found between the relative changes in the degree of orientation of the molecules of the oligomers and the strength properties of materials fabricated using a static magnetic field. It was found that the strengthening effect of the magnetic treatments has a complex structural and adhesive mechanism. Used in reinforcing fibres, where formation of hydrogen bonds with the binder is characteristic, the σ b and α im of the materials simultaneously increase as a result of the magnetic treatments, contradicting the classic theory of cross-linked polymers. The ratio of the relative changes in σ b and α im is a function of the reciprocal orientation of the reinforcing fibres and the lines of force of the external static magnetic field.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Yu. M. Molchanov, E. R. Kisis, and Yu. P. Rodin, Mekh. Polim., No. 4, 737–738 (1973).

    Google Scholar 

  2. Yu. M. Molchanov, Yu. P. Rodin, and E. R. Kisis, Mekh. Polim., No. 4, 583–587 (1978).

    Google Scholar 

  3. T. A. Man’ko, A. N. Kvasha, et al., Elektron. Obrab. Mater., No. 5, 41–42 (1982).

    Google Scholar 

  4. S. P. Davtyan, V. N. Shalygin, et al., Method of Impregnation of Carbon Reinforcement with Epoxy Binder, USSR Inventor’s Certificate No. 1597275; Byull. Izobr., No. 37 (1990).

  5. V. N. Studentsov, J. V. Karpova, and A. S. Sergeienko, “New methods in technology of polymer composites reinforced by fibres,” in: European Conference on Composite Materials ECCM-8, Naples, Italy (June 3–6, 1998).

  6. V. N. Studentsov and L. A. Panyushkina, Method of Fabrication of a Fibre-filled Polymer Composite Materials, USSR Inventor’s Certificate No. 1785909; Byull. Izobr., No. 1 (1993).

  7. Decision on issue of the RF patent for invention of 03.22.96, application No. 9400168/04, V. N. Studentsov, M. Yu. Mikhailov, and V. F. Tsarev, Method of Fabrication of Reinforced Polymer Composite Materials.

  8. Decision on issue of the RF patent for invention of 03.23.97, application No. 96105607/04, V. N. Studentsov, M. G. Komarova, et al., Method of Fabrication of a Polymer Composite Material.

  9. V. N. Studentsov, “Regulation of the strength characteristics of material reinforced with unidirectional fibres,” submitted VINITI No. 660-V of 03.10.95, Depon. Nauchn. Raboty, No. 5, 2–4 (1995).

    Google Scholar 

  10. M. G. Komarova and V. N. Studentsov, “Use of magnetic treatments for strengthening reinforced composite materials,” in: VIII International Conference “VMS-96” [in Russian], KGTU, Kazan’ (May 21, 1996).

    Google Scholar 

  11. V. N. Studentsov and S. E. Artemenko, Vysokomolek. Soedin.,A18, No. 2, 443–449. (1976)

    Google Scholar 

  12. V. N. Studentsov, Improvement of Technology for Highly Filled Polymer Composite Materials, Doctoral Dissertation, Saratov (1992).

  13. Yu. I. Voronezhtsev, V.A. Gol’dade, et al., Electric and Magnetic Fields in Polymer Composite Technology [in Russian], Nauka i Tekhnika, Minsk (1990).

    Google Scholar 

  14. V. N. Studentsov, A. A. Mizintsov, and I. V. Karpova, “Physical modification of reinforced polymer composites in a magnetic field,” in: International Conference on Polymer Composites in Industry — Slavpolikom-98 [in Russian], Slavsko, L’vov Obl. (March 3–5, 1998).

    Google Scholar 

  15. V. N. Studentsov, I. V. Karpova, and A.A. Mizintsov, “New methods in the technology of reinforced polymer composite materials (PCM),” in: V International Scientific-Technical Conference on High-Tech Chemical Technologies-98 [in Russian], Yaroslavl’ (May 18–23, 1998).

  16. I. V. Karpova and V. N. Studentsov, Method of Fabrication of Reinforced Polymer Materials, Patent application No. 97116080(10.03.97).

Download references

Authors
  1. V. N. Studentsov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. A. Mizintsov
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

Translated from Khimicheskie Volokna, No. 4, p. 29–32, July – August, 1998.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Studentsov, V.N., Mizintsov, A.A. Modification of reinforced polymer materials in a static magnetic field. Fibre Chem 30, 243–247 (1998). https://doi.org/10.1007/BF02407245

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02407245

Keywords

Search

Navigation