Hyperfine Interactions

, Volume 60, Issue 1–4, pp 841–844 | Cite as

The Ag−In intermetallic compound formation from Ag and In electrodeposited layers observed by PAC

  • P. Wodniecki
  • B. Wodniecka
  • M. Marszalek
  • Z. Mazgaj
  • B. Kubica
Article

Abstract

The PAC method was applied to study the intermetallic compound formation at Ag−In interfaces. The electrodeposited Ag−In layers of different Ag: In atomic ratios were prepared and isochronal annealing program was performed. For the comparison the bulk Ag75In25 and Ag66In34 specimens were examined. The Ag2In and AgIn2 compounds were detected and the quadrupole hyperfine interaction parameters for111In in Ag2In were measured as υQ107.9(3) MHz and η=0.48 (2).

Keywords

Thin Film Intermetallic Compound Interaction Parameter Atomic Ratio Hyperfine Interaction 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. /1/.
    V. Simić and Z. Marinković, Thin Solid Films 61 (1979) 149.CrossRefGoogle Scholar
  2. /2/.
    W. Keppner, T. Klas, W. Körner, R. Wesche and G. Schatz, Phys. Rev. Lett. 54 (1985) 2371.CrossRefADSGoogle Scholar
  3. /3/.
    H. Frauenfelder and R. M. Steffen, in Alpha-, Beta- and Gamma-Ray Spectroscopy, ed. K. Siegbahn, vol. 2 (North-Holland, Amsterdam 1965).Google Scholar
  4. /4/.
    R. Vianden, Hyp. Int. 15/16 (1983) 1081.CrossRefGoogle Scholar
  5. /5/.
    L. G. Brunnet, M. Behar, R. Iglesias, J. A. H. da Jornada, R. P. Livi and H. Saitovitch, Phys. Lett. 97A (1983) 294.ADSGoogle Scholar
  6. /6/.
    W. B. Pearson, in Handbook of Lattice Spacings and Structures of Metals and Alloys, (Pergamon Press, New York, 1958) p. 289.Google Scholar

Copyright information

© J.C. Baltzer A.G., Scientific Publishing Company 1990

Authors and Affiliations

  • P. Wodniecki
    • 1
  • B. Wodniecka
    • 1
  • M. Marszalek
    • 1
  • Z. Mazgaj
    • 1
  • B. Kubica
    • 1
  1. 1.Institute of Nuclear PhysicsCracowPoland

Personalised recommendations