Abstract
A method of compensating for the dominant component of the error in the measurement of length and linear displacement employing corrective instruments is proposed. Examples that illustrate the application of the method in different types of measurement instruments are presented.
Similar content being viewed by others
References
A. I. Fedotov, Automation of Ruling Machine Operation [in Russian], Mashinostroenie, Leningrad (1969).
A. A. Arkhangel'skii, G. I. Tkachevskii, and G. A. Livshits, Methods of Increasing the Technological Precision of Gear Planet Shapers [in Russian], Mashgiz, Moscow (1954).
G. S. Biryukov and A. L. Serko, Measurements of Geometric Quantities and Metrological Support [in Russian], Izd-vo Standartov, Moscow (1987).
M. Ya. Levitskii, Corrective Instrument [in Russian], Tekhnika, Kiev (1969).
B. N. Ivanov, Otkrytiya. Izobreteniya, No. 18 (1990); USSR Inventor's Certificate 1,559,641.
B. N. Ivanov, The Measurement of Linear Dimensions by Rolling a Measurement Roller, Mashinostronie, Moscow (1973).
B. N. Ivanov, Metrologiya, No. 2, 9 (1984).
B. N. Ivanov, Metrologiya, No. 3, 15 (1983).
B. N. Ivanov, Otkrytiya. Izobreteniya, No. 15 (1992); USSR Inventor's Certificate 1,728,645.
B. N. Ivanov, Otkrytiya. Izobreteniya, No. 30 (1990); USSR Inventor's Certificate 1,585,643.
Additional information
Translated from Izmeritel'naya Tekhnika, No. 2, pp. 23–25, February, 1996.
Rights and permissions
About this article
Cite this article
Ivanov, B.N. Compensation for the dominant error in the measurement of length and linear displacement. Meas Tech 39, 149–153 (1996). https://doi.org/10.1007/BF02378940
Issue Date:
DOI: https://doi.org/10.1007/BF02378940