, Volume 6, Issue 3–4, pp 218–221 | Cite as

A new type of electrochemical cell based on the configuration NaI |PEG| I2

  • R. Chandrasekaran
  • S. Selladurai


Different operating conditions of a new electrochemical cell based on sodium iodide and polyethylene glycol (PEG) polymer as separator as well as conducting electrolyte is reported. Five types of cells were fabricated using pure NaI, PC+NaI, water+NaI dil. HCl+NaI and dil. H2SO4+NaI in the cell configuration NaI |PEG| I2 and NaI |PEG|s I2+C. Their discharge characteristics were studied at room temperature (33 °C). From the cell parameters, it is found that the open circuit voltage ranges from 648 mV to 1023 mV and the short circuit current ranges from 29 µA to 4.8 mA.


Sodium Polymer Polyethylene Glycol Iodide 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

6. References

  1. [1]
    M.B. Aramand, J.M. Chabangno and M.J. Duclot, in: Fast ion transport in solids (P. Vashista, J.N. Mundy and G.F. Shenoy, Eds.) Elsevier North-Holland, Amsterdam, (1979) p. 131.Google Scholar
  2. [2]
    D.F. Shriver, B.L. Papke, M.A. Rather, R. Duppon, T. Wong and M. Brodwin, Solid State Ionics5, 83 (1981).CrossRefGoogle Scholar
  3. [3]
    B.C.H. Steele, G.E. Lagos, P.C. Spurdens, C. Forsyth and A.D. Foord, Solid State Ionics9/10, 391 (1983).CrossRefGoogle Scholar
  4. [4]
    M.B. Armand, Materials Science16, 245 (1986).Google Scholar
  5. [5]
    J.R. Maccallum and C.A. Vincent, Eds. 1987 Polymer electrolytes Reviews, Elsevier, Amsterdam, 1987.Google Scholar
  6. [6]
    M.A. Ratner and D.F. Shriver, Chem. Rev.88, 109 (1988).CrossRefGoogle Scholar
  7. [7]
    J.R. Owen, A.L. Lasker and S. Chandra, Superionic Solids and Solid Electrolytes-Recent Trends, Academic Press, New York (1989) p.111.Google Scholar
  8. [8]
    D. Fautenx, C. Robitaile and M.D. Lupien, J. Electrochem. Soc.134, 2761 (1987).Google Scholar
  9. [9]
    S.G. Greenbaum, Y.S. Pak, M.C. Wintersgill, J.J. Fontanella and J.W. Schultz, J. Electrochem. Soc.135, 235 (1988).Google Scholar
  10. [10]
    S.G. Greenbaum, K.J. Adamic, Y.S. Pak, M.C. Wintersgill, J.J. Fontanella, Solid State Ionics28–30, 1042 (1988).Google Scholar
  11. [11]
    S.A. Hashmi, A. Chandra and S. Chandra, Solid State Ionics-Materials and Applications, (B.V.R. Chowdari, Ed.) World Scientific Publishing Co., Singapore, (1992) p. 567.Google Scholar
  12. [12]
    S. Skaarup, K. West, B. Zachau-Christian and T. Jacobsen, Solid State Ionic Devices (B.V.R. Chowdari and S. Radhakrishna, Eds.) World Scientific Publishing Co., Singapore (1998) p. 75.Google Scholar
  13. [13]
    M.Z.A. Munishi, A. Gilmour, W.H. Smryl and B.B. Owens, J. Electrochem. Soc.136, 1847 (1989).Google Scholar
  14. [14]
    S. Sreepathi Rao, M. Jaibal Reedy, E. Laxmi Narsaiah, and U.V. Subba Rao, Mat. Sci. and Engg.B33, 173 (1995).Google Scholar
  15. [15]
    T. Sreekanth, M. Jaipal Reddy, S. Ramalingaiah and U.V. Subba Rao, J. Power Sources79, 105 (1999).Google Scholar
  16. [16]
    P.R. Sorensen and T. Jacobson, Electrochem. Acta27, 1675 (1982).Google Scholar
  17. [17]
    D. Fautenx and C. Robitaile, J. Electrochem. Soc.133, 307 (1987).Google Scholar
  18. [18]
    T.M. Abrantes, L.J. Alcacer and C.A.C. Sequeira, Solid State Ionics18/19, 315 (1986).CrossRefGoogle Scholar
  19. [19]
    S. Chandra, S.A. Hashmi, M. Saleem and R.C. Agrawal, Solid State Ionics66, 1 (1993).Google Scholar

Copyright information

© IfI - Institute for Ionics 2000

Authors and Affiliations

  • R. Chandrasekaran
    • 1
  • S. Selladurai
    • 1
  1. 1.Solid State Ionics Lab, Department of PhysicsMIT, Anna UniversityChennaiIndia

Personalised recommendations